- 08 Jun, 2016 4 commits
-
-
Maciej W. Rozycki authored
commit e49d3848 upstream. Fix a build regression from commit c9017757 ("MIPS: init upper 64b of vector registers when MSA is first used"): arch/mips/built-in.o: In function `enable_restore_fp_context': traps.c:(.text+0xbb90): undefined reference to `_init_msa_upper' traps.c:(.text+0xbb90): relocation truncated to fit: R_MIPS_26 against `_init_msa_upper' traps.c:(.text+0xbef0): undefined reference to `_init_msa_upper' traps.c:(.text+0xbef0): relocation truncated to fit: R_MIPS_26 against `_init_msa_upper' to !CONFIG_CPU_HAS_MSA configurations with older GCC versions, which are unable to figure out that calls to `_init_msa_upper' are indeed dead. Of the many ways to tackle this failure choose the approach we have already taken in `thread_msa_context_live'. [ralf@linux-mips.org: Drop patch segment to junk file.] Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13271/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Burton authored
commit ab4a92e6 upstream. When emulating a jalr instruction with rd == $0, the code in isBranchInstr was incorrectly writing to GPR $0 which should actually always remain zeroed. This would lead to any further instructions emulated which use $0 operating on a bogus value until the task is next context switched, at which point the value of $0 in the task context would be restored to the correct zero by a store in SAVE_SOME. Fix this by not writing to rd if it is $0. Fixes: 102cedc3 ("MIPS: microMIPS: Floating point support.") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13160/Signed-off-by:
-
Leonid Yegoshin authored
commit 41fa29e4 upstream. Error recovery pointers for fixups was improperly set as ".word" which is unsuitable for MIPS64. Replaced by STR(PTR) [ralf@linux-mips.org: Apply changes as requested in the review process.] Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Cc: macro@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9911/Signed-off-by:
-
Chao Yu authored
commit ab47036d upstream. Below backtrace info was reported by Yunlei He: Call Trace: [<ffffffff817a9395>] schedule+0x35/0x80 [<ffffffff817abb7d>] rwsem_down_read_failed+0xed/0x130 [<ffffffff813c12a8>] call_rwsem_down_read_failed+0x18/0x [<ffffffff817ab1d0>] down_read+0x20/0x30 [<ffffffffa02a1a12>] f2fs_evict_inode+0x242/0x3a0 [f2fs] [<ffffffff81217057>] evict+0xc7/0x1a0 [<ffffffff81217cd6>] iput+0x196/0x200 [<ffffffff812134f9>] __dentry_kill+0x179/0x1e0 [<ffffffff812136f9>] dput+0x199/0x1f0 [<ffffffff811fe77b>] __fput+0x18b/0x220 [<ffffffff811fe84e>] ____fput+0xe/0x10 [<ffffffff81097427>] task_work_run+0x77/0x90 [<ffffffff81074d62>] exit_to_usermode_loop+0x73/0xa2 [<ffffffff81003b7a>] do_syscall_64+0xfa/0x110 [<ffffffff817acf65>] entry_SYSCALL64_slow_path+0x25/0x25 Call Trace: [<ffffffff817a9395>] schedule+0x35/0x80 [<ffffffff81216dc3>] __wait_on_freeing_inode+0xa3/0xd0 [<ffffffff810bc300>] ? autoremove_wake_function+0x40/0x4 [<ffffffff8121771d>] find_inode_fast+0x7d/0xb0 [<ffffffff8121794a>] ilookup+0x6a/0xd0 [<ffffffffa02bc740>] sync_node_pages+0x210/0x650 [f2fs] [<ffffffff8122e690>] ? do_fsync+0x70/0x70 [<ffffffffa02b085e>] block_operations+0x9e/0xf0 [f2fs] [<ffffffff8137b795>] ? bio_endio+0x55/0x60 [<ffffffffa02b0942>] write_checkpoint+0x92/0xba0 [f2fs] [<ffffffff8117da57>] ? mempool_free_slab+0x17/0x20 [<ffffffff8117de8b>] ? mempool_free+0x2b/0x80 [<ffffffff8122e690>] ? do_fsync+0x70/0x70 [<ffffffffa02a53e3>] f2fs_sync_fs+0x63/0xd0 [f2fs] [<ffffffff8129630f>] ? ext4_sync_fs+0xbf/0x190 [<ffffffff8122e6b0>] sync_fs_one_sb+0x20/0x30 [<ffffffff812002e9>] iterate_supers+0xb9/0x110 [<ffffffff8122e7b5>] sys_sync+0x55/0x90 [<ffffffff81003ae9>] do_syscall_64+0x69/0x110 [<ffffffff817acf65>] entry_SYSCALL64_slow_path+0x25/0x25 With following excuting serials, we will set inline_node in inode page after inode was unlinked, result in a deadloop described as below: 1. open file 2. write file 3. unlink file 4. write file 5. close file Thread A Thread B - dput - iput_final - inode->i_state |= I_FREEING - evict - f2fs_evict_inode - f2fs_sync_fs - write_checkpoint - block_operations - f2fs_lock_all (down_write(cp_rwsem)) - f2fs_lock_op (down_read(cp_rwsem)) - sync_node_pages - ilookup - find_inode_fast - __wait_on_freeing_inode (wait on I_FREEING clear) Here, we change to set inline_node flag only for linked inode for fixing. Reported-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
Chao Yu <yuchao0@huawei.com> Tested-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
- 01 Jun, 2016 36 commits
-
-
Greg Kroah-Hartman authored
-
Arnd Bergmann authored
commit c9c6837d upstream. gcc-6 started warning by default about variables that are not used anywhere and that are marked 'const', generating many false positives in an allmodconfig build, e.g.: arch/arm/mach-davinci/board-da830-evm.c:282:20: warning: 'da830_evm_emif25_pins' defined but not used [-Wunused-const-variable=] arch/arm/plat-omap/dmtimer.c:958:34: warning: 'omap_timer_match' defined but not used [-Wunused-const-variable=] drivers/bluetooth/hci_bcm.c:625:39: warning: 'acpi_bcm_default_gpios' defined but not used [-Wunused-const-variable=] drivers/char/hw_random/omap-rng.c:92:18: warning: 'reg_map_omap4' defined but not used [-Wunused-const-variable=] drivers/devfreq/exynos/exynos5_bus.c:381:32: warning: 'exynos5_busfreq_int_pm' defined but not used [-Wunused-const-variable=] drivers/dma/mv_xor.c:1139:34: warning: 'mv_xor_dt_ids' defined but not used [-Wunused-const-variable=] This is similar to the existing -Wunused-but-set-variable warning that was added in an earlier release and that we disable by default now and only enable when W=1 is set, so it makes sense to do the same here. Once we have eliminated the majority of the warnings for both, we can put them back into the default list. We probably want this in backport kernels as well, to allow building them with gcc-6 without introducing extra warnings. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Olof Johansson <olof@lixom.net> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Johannes Thumshirn authored
commit 305c2e71 upstream. Now that we've done a more comprehensive fix with the intermediate target state we can remove the previous hack introduced with commit 90a88d6e ("scsi: fix soft lockup in scsi_remove_target() on module removal"). Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Johannes Thumshirn authored
commit f05795d3 upstream. Add intermediate STARGET_REMOVE state to scsi_target_state to avoid running into the BUG_ON() in scsi_target_reap(). The STARGET_REMOVE state is only valid in the path from scsi_remove_target() to scsi_target_destroy() indicating this target is going to be removed. This re-fixes the problem introduced in commits bc3f02a7 ("[SCSI] scsi_remove_target: fix softlockup regression on hot remove") and 40998193 ("scsi: restart list search after unlock in scsi_remove_target") in a more comprehensive way. [mkp: Included James' fix for scsi_target_destroy()] Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by:
James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by:
-
Mikulas Patocka authored
commit 037369b8 upstream. The HPFS filesystem used generic_show_options to produce string that is displayed in /proc/mounts. However, there is a problem that the options may disappear after remount. If we mount the filesystem with option1 and then remount it with option2, /proc/mounts should show both option1 and option2, however it only shows option2 because the whole option string is replaced with replace_mount_options in hpfs_remount_fs. To fix this bug, implement the hpfs_show_options function that prints options that are currently selected. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mikulas Patocka authored
commit 44d51706 upstream. Commit ce657611 ("hpfs: kstrdup() out of memory handling") checks if the kstrdup function returns NULL due to out-of-memory condition. However, if we are remounting a filesystem with no change to filesystem-specific options, the parameter data is NULL. In this case, kstrdup returns NULL (because it was passed NULL parameter), although no out of memory condition exists. The mount syscall then fails with ENOMEM. This patch fixes the bug. We fail with ENOMEM only if data is non-NULL. The patch also changes the call to replace_mount_options - if we didn't pass any filesystem-specific options, we don't call replace_mount_options (thus we don't erase existing reported options). Fixes: ce657611 ("hpfs: kstrdup() out of memory handling") Signed-off-by:
-
Richard Weinberger authored
commit 1900149c upstream. Ezequiel reported that he's facing UBI going into read-only mode after power cut. It turned out that this behavior happens only when updating a static volume is interrupted and Fastmap is used. A possible trace can look like: ubi0 warning: ubi_io_read_vid_hdr [ubi]: no VID header found at PEB 2323, only 0xFF bytes ubi0 warning: ubi_eba_read_leb [ubi]: switch to read-only mode CPU: 0 PID: 833 Comm: ubiupdatevol Not tainted 4.6.0-rc2-ARCH #4 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 300E4C/300E5C/300E7C/NP300E5C-AD8AR, BIOS P04RAP 10/15/2012 0000000000000286 00000000eba949bd ffff8800c45a7b38 ffffffff8140d841 ffff8801964be000 ffff88018eaa4800 ffff8800c45a7bb8 ffffffffa003abf6 ffffffff850e2ac0 8000000000000163 ffff8801850e2ac0 ffff8801850e2ac0 Call Trace: [<ffffffff8140d841>] dump_stack+0x63/0x82 [<ffffffffa003abf6>] ubi_eba_read_leb+0x486/0x4a0 [ubi] [<ffffffffa00453b3>] ubi_check_volume+0x83/0xf0 [ubi] [<ffffffffa0039d97>] ubi_open_volume+0x177/0x350 [ubi] [<ffffffffa00375d8>] vol_cdev_open+0x58/0xb0 [ubi] [<ffffffff8124b08e>] chrdev_open+0xae/0x1d0 [<ffffffff81243bcf>] do_dentry_open+0x1ff/0x300 [<ffffffff8124afe0>] ? cdev_put+0x30/0x30 [<ffffffff81244d36>] vfs_open+0x56/0x60 [<ffffffff812545f4>] path_openat+0x4f4/0x1190 [<ffffffff81256621>] do_filp_open+0x91/0x100 [<ffffffff81263547>] ? __alloc_fd+0xc7/0x190 [<ffffffff812450df>] do_sys_open+0x13f/0x210 [<ffffffff812451ce>] SyS_open+0x1e/0x20 [<ffffffff81a99e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 UBI checks static volumes for data consistency and reads the whole volume upon first open. If the volume is found erroneous users of UBI cannot read from it, but another volume update is possible to fix it. The check is performed by running ubi_eba_read_leb() on every allocated LEB of the volume. For static volumes ubi_eba_read_leb() computes the checksum of all data stored in a LEB. To verify the computed checksum it has to read the LEB's volume header which stores the original checksum. If the volume header is not found UBI treats this as fatal internal error and switches to RO mode. If the UBI device was attached via a full scan the assumption is correct, the volume header has to be present as it had to be there while scanning to get known as mapped. If the attach operation happened via Fastmap the assumption is no longer correct. When attaching via Fastmap UBI learns the mapping table from Fastmap's snapshot of the system state and not via a full scan. It can happen that a LEB got unmapped after a Fastmap was written to the flash. Then UBI can learn the LEB still as mapped and accessing it returns only 0xFF bytes. As UBI is not a FTL it is allowed to have mappings to empty PEBs, it assumes that the layer above takes care of LEB accounting and referencing. UBIFS does so using the LEB property tree (LPT). For static volumes UBI blindly assumes that all LEBs are present and therefore special actions have to be taken. The described situation can happen when updating a static volume is interrupted, either by a user or a power cut. The volume update code first unmaps all LEBs of a volume and then writes LEB by LEB. If the sequence of operations is interrupted UBI detects this either by the absence of LEBs, no volume header present at scan time, or corrupted payload, detected via checksum. In the Fastmap case the former method won't trigger as no scan happened and UBI automatically thinks all LEBs are present. Only by reading data from a LEB it detects that the volume header is missing and incorrectly treats this as fatal error. To deal with the situation ubi_eba_read_leb() from now on checks whether we attached via Fastmap and handles the absence of a volume header like a data corruption error. This way interrupted static volume updates will correctly get detected also when Fastmap is used. Reported-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Tested-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Chris Mason authored
commit 56244ef1 upstream. When btrfs_copy_from_user isn't able to copy all of the pages, we need to adjust our accounting to reflect the work that was actually done. Commit 2e78c927 changed around the decisions a little and we ended up skipping the accounting adjustments some of the time. This commit makes sure that when we don't copy anything at all, we still hop into the adjustments, and switches to release_bytes instead of write_bytes, since write_bytes isn't aligned. The accounting errors led to warnings during btrfs_destroy_inode: [ 70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0 [ 70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk [ 70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G W 4.6.0-rc6_00062_g2997da1-dirty #23 [ 70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014 [ 70.847542] 0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202 [ 70.847543] 0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08 [ 70.847547] ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28 [ 70.847547] Call Trace: [ 70.847550] [<ffffffff8149d5e9>] dump_stack+0x51/0x78 [ 70.847551] [<ffffffff8107bdfd>] __warn+0xfd/0x120 [ 70.847553] [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20 [ 70.847555] [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0 [ 70.847556] [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140 [ 70.847558] [<ffffffff812004b3>] destroy_inode+0x43/0x70 [ 70.847559] [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40 [ 70.847560] [<ffffffff81200c68>] evict+0x148/0x1d0 [ 70.847562] [<ffffffff81398ade>] ? start_transaction+0x3de/0x460 [ 70.847564] [<ffffffff81200d49>] dispose_list+0x59/0x80 [ 70.847565] [<ffffffff81201ba0>] evict_inodes+0x180/0x190 [ 70.847566] [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50 [ 70.847568] [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100 [ 70.847569] [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20 [ 70.847571] [<ffffffff811e9796>] kill_anon_super+0x16/0x30 [ 70.847573] [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130 [ 70.847574] [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90 [ 70.847576] [<ffffffff811e9e61>] deactivate_super+0x51/0x70 [ 70.847577] [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80 [ 70.847579] [<ffffffff81205402>] __cleanup_mnt+0x12/0x20 [ 70.847581] [<ffffffff81098358>] task_work_run+0x68/0xa0 [ 70.847582] [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0 [ 70.847583] [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170 [ 70.847586] [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25 This is the test program I used to force short returns from btrfs_copy_from_user void *dontneed(void *arg) { char *p = arg; int ret; while(1) { ret = madvise(p, BUFSIZE/4, MADV_DONTNEED); if (ret) { perror("madvise"); exit(1); } } } int main(int ac, char **av) { int ret; int fd; char *filename; unsigned long offset; char *buf; int i; pthread_t tid; if (ac != 2) { fprintf(stderr, "usage: dammitdave filename\n"); exit(1); } buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); if (buf == MAP_FAILED) { perror("mmap"); exit(1); } memset(buf, 'a', BUFSIZE); filename = av[1]; ret = pthread_create(&tid, NULL, dontneed, buf); if (ret) { fprintf(stderr, "error %d from pthread_create\n", ret); exit(1); } ret = pthread_detach(tid); if (ret) { fprintf(stderr, "pthread detach failed %d\n", ret); exit(1); } while (1) { fd = open(filename, O_RDWR | O_CREAT, 0600); if (fd < 0) { perror("open"); exit(1); } for (i = 0; i < ROUNDS; i++) { int this_write = BUFSIZE; offset = rand() % MAXSIZE; ret = pwrite(fd, buf, this_write, offset); if (ret < 0) { perror("pwrite"); exit(1); } else if (ret != this_write) { fprintf(stderr, "short write to %s offset %lu ret %d\n", filename, offset, ret); exit(1); } if (i == ROUNDS - 1) { ret = sync_file_range(fd, offset, 4096, SYNC_FILE_RANGE_WRITE); if (ret < 0) { perror("sync_file_range"); exit(1); } } } ret = ftruncate(fd, 0); if (ret < 0) { perror("ftruncate"); exit(1); } ret = close(fd); if (ret) { perror("close"); exit(1); } ret = unlink(filename); if (ret) { perror("unlink"); exit(1); } } return 0; } Signed-off-by:
Chris Mason <clm@fb.com> Reported-by:
Dave Jones <dsj@fb.com> Fixes: 2e78c927Signed-off-by:
-
Luke Dashjr authored
commit 4c63c245 upstream. 32-bit ioctl uses these rather than the regular FS_IOC_* versions. They can be handled in btrfs using the same code. Without this, 32-bit {ch,ls}attr fail. Signed-off-by:
Luke Dashjr <luke-jr+git@utopios.org> Reviewed-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
James Hogan authored
commit ca9eb49a upstream. The generic copy_siginfo() is currently defined in asm-generic/siginfo.h, after including uapi/asm-generic/siginfo.h which defines the generic struct siginfo. However this makes it awkward for an architecture to use it if it has to define its own struct siginfo (e.g. MIPS and potentially IA64), since it means that asm-generic/siginfo.h can only be included after defining the arch-specific siginfo, which may be problematic if the arch-specific definition needs definitions from uapi/asm-generic/siginfo.h. It is possible to work around this by first including uapi/asm-generic/siginfo.h to get the constants before defining the arch-specific siginfo, and include asm-generic/siginfo.h after. However uapi headers can't be included by other uapi headers, so that first include has to be in an ifdef __kernel__, with the non __kernel__ case including the non-UAPI header instead. Instead of that mess, move the generic copy_siginfo() definition into linux/signal.h, which allows an arch-specific uapi/asm/siginfo.h to include asm-generic/siginfo.h and define the arch-specific siginfo, and for the generic copy_siginfo() to see that arch-specific definition. Signed-off-by:
-
Heinz Mauelshagen authored
commit 092398dc upstream. Introduced by upstream commit 70d9798b The raid0 personality does not create mddev->thread as oposed to other personalities leading to its unconditional access in mddev_suspend() causing an oops. Patch checks for mddev->thread in order to keep the intention of aforementioned commit. Fixes: 70d9798b ("MD: warn for potential deadlock") Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Andreas Noever authored
commit 2ffa9a5d upstream. If tb_drom_read() fails, sw->drom is freed but not set to NULL. sw->drom is then freed again in the error path of tb_switch_alloc(). The bug can be triggered by unplugging a thunderbolt device shortly after it is detected by the thunderbolt driver. Clear sw->drom if tb_drom_read() fails. [bhelgaas: add Fixes:, stable versions of interest] Fixes: 343fcb8c ("thunderbolt: Fix nontrivial endpoint devices.") Signed-off-by:
Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Bart Van Assche authored
commit f83b2561 upstream. Avoid that the following kernel oops occurs if memory pool allocation fails: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa048d0a0>] ib_drain_rq+0x0/0x20 [ib_core] Call Trace: [<ffffffffa04af386>] srp_create_target+0xca6/0x13a9 [ib_srp] [<ffffffff813cc863>] dev_attr_store+0x13/0x20 [<ffffffff81214b50>] sysfs_kf_write+0x40/0x50 [<ffffffff81213f1c>] kernfs_fop_write+0x13c/0x180 [<ffffffff81197683>] __vfs_write+0x23/0xf0 [<ffffffff81198744>] vfs_write+0xa4/0x1a0 [<ffffffff81199a44>] SyS_write+0x44/0xa0 [<ffffffff8159e3e9>] entry_SYSCALL_64_fastpath+0x1c/0xac Fixes: 1dc7b1f1 ("IB/srp: use the new CQ API") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Tested-by:
Laurence Oberman <loberman@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 54f5c9c5 upstream. Avoid that the following BUG() is triggered against a debug kernel: kernel BUG at include/linux/scatterlist.h:92! RIP: 0010:[<ffffffffa0467199>] [<ffffffffa0467199>] srp_map_idb+0x199/0x1a0 [ib_srp] Call Trace: [<ffffffffa04685fa>] srp_map_data+0x84a/0x890 [ib_srp] [<ffffffffa0469674>] srp_queuecommand+0x1e4/0x610 [ib_srp] [<ffffffff813f5a5e>] scsi_dispatch_cmd+0x9e/0x180 [<ffffffff813f8b07>] scsi_request_fn+0x477/0x610 [<ffffffff81298ffe>] __blk_run_queue+0x2e/0x40 [<ffffffff81299070>] blk_delay_work+0x20/0x30 [<ffffffff81071f07>] process_one_work+0x197/0x480 [<ffffffff81072239>] worker_thread+0x49/0x490 [<ffffffff810787ea>] kthread+0xea/0x100 [<ffffffff8159b632>] ret_from_fork+0x22/0x40 Fixes: f7f7aab1 ("IB/srp: Convert to new registration API") Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Hui Wang authored
commit 86c72d1c upstream. Add the pin configuration value of this machine into the pin_quirk table to make DELL1_MIC_NO_PRESENCE apply to this machine. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kailang Yang authored
commit 7d727869 upstream. Add support for ALC295/ALC3254. They are simply compatible with ALC225 chip. Signed-off-by:
Kailang Yang <kailang@realtek.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 423cd785 upstream. The headphone has noise when playing sound or switching microphone sources. It uses the same codec on XPS 13 9350, but with different subsystem ID. Applying the fixup can solve the issue. Also, changing the model name to better differentiate models. v2: Reorder by device ID. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Kailang Yang authored
commit dcd4f0db upstream. Support new codecs for ALC234/ALC274/ALC294. This three codecs was the same IC. But bonding is not the same. Signed-off-by:
-
Andreas Werner authored
commit f75564d3 upstream. The bar number is found in reg2 within the gdd. Therefore we need to change the assigment from reg1 to reg2 which is the correct location. Signed-off-by:
Andreas Werner <andreas.werner@men.de> Fixes: '3764e82e' drivers: Introduce MEN Chameleon Bus Signed-off-by:
-
Ashutosh Dixit authored
commit 9bf292bf upstream. The MIC VOP driver does two successive reads from user space to read a variable length data structure. Kernel memory corruption can result if the data structure changes between the two reads. This patch disallows the chance of this happening. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116651 Reported by: Pengfei Wang <wpengfeinudt@gmail.com> Reviewed-by:
Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Olga Kornievskaia authored
commit c2985d00 upstream. Commit 80f96427 ("NFSv4.x: Enforce the ca_maxreponsesize_cached on the back channel") causes an oops when it receives a callback with cachethis=yes. [ 109.667378] BUG: unable to handle kernel NULL pointer dereference at 00000000000002c8 [ 109.669476] IP: [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4] [ 109.671216] PGD 0 [ 109.671736] Oops: 0000 [#1] SMP [ 109.705427] CPU: 1 PID: 3579 Comm: nfsv4.1-svc Not tainted 4.5.0-rc1+ #1 [ 109.706987] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014 [ 109.709468] task: ffff8800b4408000 ti: ffff88008448c000 task.ti: ffff88008448c000 [ 109.711207] RIP: 0010:[<ffffffffa08a3e68>] [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4] [ 109.713521] RSP: 0018:ffff88008448fca0 EFLAGS: 00010286 [ 109.714762] RAX: ffff880081ee202c RBX: ffff8800b7b5b600 RCX: 0000000000000001 [ 109.716427] RDX: 0000000000000008 RSI: 0000000000000008 RDI: 0000000000000000 [ 109.718091] RBP: ffff88008448fda8 R08: 0000000000000000 R09: 000000000b000000 [ 109.719757] R10: ffff880137786000 R11: ffff8800b7b5b600 R12: 0000000001000000 [ 109.721415] R13: 0000000000000002 R14: 0000000053270000 R15: 000000000000000b [ 109.723061] FS: 0000000000000000(0000) GS:ffff880139640000(0000) knlGS:0000000000000000 [ 109.724931] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.726278] CR2: 00000000000002c8 CR3: 0000000034d50000 CR4: 00000000001406e0 [ 109.727972] Stack: [ 109.728465] ffff880081ee202c ffff880081ee201c 000000008448fcc0 ffff8800baccb800 [ 109.730349] ffff8800baccc800 ffffffffa08d0380 0000000000000000 0000000000000000 [ 109.732211] ffff8800b7b5b600 0000000000000001 ffffffff81d073c0 ffff880081ee3090 [ 109.734056] Call Trace: [ 109.734657] [<ffffffffa03795d4>] svc_process_common+0x5c4/0x6c0 [sunrpc] [ 109.736267] [<ffffffffa0379a4c>] bc_svc_process+0x1fc/0x360 [sunrpc] [ 109.737775] [<ffffffffa08a2c2c>] nfs41_callback_svc+0x10c/0x1d0 [nfsv4] [ 109.739335] [<ffffffff810cb380>] ? prepare_to_wait_event+0xf0/0xf0 [ 109.740799] [<ffffffffa08a2b20>] ? nfs4_callback_svc+0x50/0x50 [nfsv4] [ 109.742349] [<ffffffff810a6998>] kthread+0xd8/0xf0 [ 109.743495] [<ffffffff810a68c0>] ? kthread_park+0x60/0x60 [ 109.744776] [<ffffffff816abc4f>] ret_from_fork+0x3f/0x70 [ 109.746037] [<ffffffff810a68c0>] ? kthread_park+0x60/0x60 [ 109.747324] Code: cc 45 31 f6 48 8b 85 00 ff ff ff 44 89 30 48 8b 85 f8 fe ff ff 44 89 20 48 8b 9d 38 ff ff ff 48 8b bd 30 ff ff ff 48 85 db 74 4c <4c> 8b af c8 02 00 00 4d 8d a5 08 02 00 00 49 81 c5 98 02 00 00 [ 109.754361] RIP [<ffffffffa08a3e68>] nfs4_callback_compound+0x4f8/0x690 [nfsv4] [ 109.756123] RSP <ffff88008448fca0> [ 109.756951] CR2: 00000000000002c8 [ 109.757738] ---[ end trace 2b8555511ab5dfb4 ]--- [ 109.758819] Kernel panic - not syncing: Fatal exception [ 109.760126] Kernel Offset: disabled [ 118.938934] ---[ end Kernel panic - not syncing: Fatal exception It doesn't unlock the table nor does it set the cps->clp pointer which is later needed by nfs4_cb_free_slot(). Fixes: 80f96427 ("NFSv4.x: Enforce the ca_maxresponsesize_cached ...") Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Jan Beulich authored
commit 2e51f262 upstream. The switch to elf_getshdr{num,strndx} post-dates the oldest tool chain the kernel is supposed to be able to build with, so try to cope with such an environment. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/732dae6872b7ff187d94f22bb699a12849d3fe04.1463430618.git.jpoimboe@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lucas Stach authored
commit 46856fab upstream. Commits 190aa430 (Add AMD Mullins platform support) and cca118fa (Add AMD Carrizo platform support) enabled the driver on a lot more devices, but the following commit missed a single location in the code when checking if the SB800 register offsets should be used. This leads to the wrong register being written which in turn causes ACPI to go haywire. Fix this by introducing a helper function to check for the new register layout and use this consistently. https://bugzilla.kernel.org/show_bug.cgi?id=114201 https://bugzilla.redhat.com/show_bug.cgi?id=1329910 Fixes: bdecfcdb (sp5100_tco: fix the device check for SB800 and later chipsets) Signed-off-by:
Lucas Stach <dev@lynxeye.de> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Guenter Roeck authored
commit e1f30282 upstream. lockdep reports the following circular locking dependency. ====================================================== INFO: possible circular locking dependency detected ] 4.6.0-rc3-00191-gfabf418 #162 Not tainted ------------------------------------------------------- systemd/1 is trying to acquire lock: ((&(&wd_data->work)->work)){+.+...}, at: [<80141650>] flush_work+0x0/0x280 but task is already holding lock: (&wd_data->lock){+.+...}, at: [<804acfa8>] watchdog_release+0x18/0x190 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wd_data->lock){+.+...}: [<80662310>] mutex_lock_nested+0x64/0x4a8 [<804aca4c>] watchdog_ping_work+0x18/0x4c [<80143128>] process_one_work+0x1ac/0x500 [<801434b4>] worker_thread+0x38/0x554 [<80149510>] kthread+0xf4/0x108 [<80107c10>] ret_from_fork+0x14/0x24 -> #0 ((&(&wd_data->work)->work)){+.+...}: [<8017c4e8>] lock_acquire+0x70/0x90 [<8014169c>] flush_work+0x4c/0x280 [<801440f8>] __cancel_work_timer+0x9c/0x1e0 [<804acfcc>] watchdog_release+0x3c/0x190 [<8022c5e8>] __fput+0x80/0x1c8 [<80147b28>] task_work_run+0x94/0xc8 [<8010b998>] do_work_pending+0x8c/0xb4 [<80107ba8>] slow_work_pending+0xc/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&wd_data->lock); lock((&(&wd_data->work)->work)); lock(&wd_data->lock); lock((&(&wd_data->work)->work));
-
Martin Sperl authored
commit ec36a5c6 upstream. Add missing locking to: * bcm2835_pll_divider_on * bcm2835_pll_divider_off to protect the read modify write cycle for the register access protecting both cm_reg and a2w_reg registers. Fixes: 41691b88 ("clk: bcm2835: Add support for programming the audio domain clocks") Signed-off-by:
Martin Sperl <kernel@martin.sperl.org> Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
Peter Zijlstra authored
commit 54cf809b upstream. Similar to commits: 51d7d520 ("powerpc: Add smp_mb() to arch_spin_is_locked()") d86b8da0 ("arm64: spinlock: serialise spin_unlock_wait against concurrent lockers") qspinlock suffers from the fact that the _Q_LOCKED_VAL store is unordered inside the ACQUIRE of the lock. And while this is not a problem for the regular mutual exclusive critical section usage of spinlocks, it breaks creative locking like: spin_lock(A) spin_lock(B) spin_unlock_wait(B) if (!spin_is_locked(A)) do_something() do_something() In that both CPUs can end up running do_something at the same time, because our _Q_LOCKED_VAL store can drop past the spin_unlock_wait() spin_is_locked() loads (even on x86!!). To avoid making the normal case slower, add smp_mb()s to the less used spin_unlock_wait() / spin_is_locked() side of things to avoid this problem. Reported-and-tested-by:
Davidlohr Bueso <dave@stgolabs.net> Reported-by:
Giovanni Gherdovich <ggherdovich@suse.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Chanwoo Choi authored
commit b8995f52 upstream. This patch fixes the broken serial log when changing the clock source of uart device. Before disabling the original clock source, this patch enables the new clock source to protect the clock off state for a split second. Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com>
-
Andy Shevchenko authored
commit c42850f1 upstream. There is a special register that shows interrupt status by source. In particular case the source can be a combination of DMA Tx, DMA Rx, and UART. Read the register and call the handlers only for sources that request an interrupt. Fixes: 6ede6dcd ("serial: 8250_mid: add support for DMA engine handling from UART MMIO") Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
commit 107e15fc upstream. Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce an additional field in the internal structure and pass PCI BAR based on device ID. Reported-by:
"Lai, Poey Seng" <poey.seng.lai@intel.com> Fixes: 6ede6dcd ("serial: 8250_mid: add support for DMA engine handling from UART MMIO") Reviewed-by:
-
David Müller authored
commit 6f210c18 upstream. Since commit 21947ba6 ("serial: 8250_pci: replace switch-case by formula"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Signed-off-by:
David Müller <d.mueller@elsoft.ch> Fixes: 21947ba6 ("serial: 8250_pci: replace switch-case by formula") Suggested-by:
-
Brian Bloniarz authored
commit 0f40fbbc upstream. OpenSSH expects the (non-blocking) read() of pty master to return EAGAIN only if it has received all of the slave-side output after it has received SIGCHLD. This used to work on pre-3.12 kernels. This fix effectively forces non-blocking read() and poll() to block for parallel i/o to complete for all ttys. It also unwinds these changes: 1) f8747d4a tty: Fix pty master read() after slave closes 2) 52bce7f8 pty, n_tty: Simplify input processing on final close 3) 1a48632f pty: Fix input race when closing Inspired by analysis and patch from Marc Aurele La France <tsi@tuyoix.net> Reported-by:
Volth <openssh@volth.com> Reported-by:
Marc Aurele La France <tsi@tuyoix.net> BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=52 BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=2492Signed-off-by:
Brian Bloniarz <brian.bloniarz@gmail.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Alexandre Belloni authored
commit 5be605ac upstream. Commit 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") actually allowed to enable hardware handshaking. Before, the CRTSCTS flags was silently ignored. As the DMA controller can't drive RTS (as explain in the commit message). Ensure that hardware flow control stays disabled when DMA is used and FIFOs are not available. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1cf6e8fc ("tty/serial: at91: fix RTS line management when hardware handshake is enabled") Signed-off-by:
-
Jiri Slaby authored
commit d175feca upstream. Dmitry reported, that the current cleanup code in n_gsm can trigger a warning: WARNING: CPU: 2 PID: 24238 at drivers/tty/n_gsm.c:2048 gsm_cleanup_mux+0x166/0x6b0() ... Call Trace: ... [<ffffffff81247ab9>] warn_slowpath_null+0x29/0x30 kernel/panic.c:490 [<ffffffff828d0456>] gsm_cleanup_mux+0x166/0x6b0 drivers/tty/n_gsm.c:2048 [<ffffffff828d4d87>] gsmld_open+0x5b7/0x7a0 drivers/tty/n_gsm.c:2386 [<ffffffff828b9078>] tty_ldisc_open.isra.2+0x78/0xd0 drivers/tty/tty_ldisc.c:447 [<ffffffff828b973a>] tty_set_ldisc+0x1ca/0xa70 drivers/tty/tty_ldisc.c:567 [< inline >] tiocsetd drivers/tty/tty_io.c:2650 [<ffffffff828a14ea>] tty_ioctl+0xb2a/0x2140 drivers/tty/tty_io.c:2883 ... But this is a legal path when open fails to find a space in the gsm_mux array and tries to clean up. So make it a standard test instead of a warning. Reported-by:
"Dmitry Vyukov" <dvyukov@google.com> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/CACT4Y+bHQbAB68VFi7Romcs-Z9ZW3kQRvcq+BvHH1oa5NcAdLA@mail.gmail.com Fixes: 5a640967 ("tty/n_gsm.c: fix a memory leak in gsmld_open()") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Jiri Slaby authored
commit 6798df4c upstream. When csw->con_startup() fails in do_register_con_driver, we return no error (i.e. 0). This was changed back in 2006 by commit 3e795de7. Before that we used to return -ENODEV. So fix the return value to be -ENODEV in that case again. Fixes: 3e795de7 ("VT binding: Add binding/unbinding support for the VT console") Signed-off-by:
"Dan Carpenter" <dan.carpenter@oracle.com> Signed-off-by:
-
Dave Hansen authored
commit e8df1a95 upstream. When I added support for the Memory Protection Keys processor feature, I had to reindent the REQUIRED/DISABLED_MASK macros, and also consult the later cpufeature words. I'm not quite sure how I bungled it, but I consulted the wrong word at the end. This only affected required or disabled cpu features in cpufeature words 14, 15 and 16. So, only Protection Keys itself was screwed over here. The result was that if you disabled pkeys in your .config, you might still see some code show up that should have been compiled out. There should be no functional problems, though. In verifying this patch I also realized that the DISABLE_PKU/OSPKE macros were defined backwards and that the cpu_has() check in setup_pku() was not doing the compile-time disabled checks. So also fix the macro for DISABLE_PKU/OSPKE and add a compile-time check for pkeys being enabled in setup_pku(). Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dave Hansen <dave@sr71.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: dfb4a70f ("x86/cpufeature, x86/mm/pkeys: Add protection keys related CPUID definitions") Link: http://lkml.kernel.org/r/20160513221328.C200930B@viggo.jf.intel.comSigned-off-by:
-
Stefano Stabellini authored
commit 702f9260 upstream. b4ff8389 is incomplete: relies on nr_legacy_irqs() to get the number of legacy interrupts when actually nr_legacy_irqs() returns 0 after probe_8259A(). Use NR_IRQS_LEGACY instead. Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Signed-off-by:
-
