- 06 Mar, 2015 7 commits
-
-
Jes Sorensen authored
Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
No point shifting raid right, just to shift it left again before re-adding it. Signed-off-by:
-
Jes Sorensen authored
The only case where fw_ractrl = false was when the firmware failed to load, and in that case we are dead in the water anyway. Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
- 03 Mar, 2015 1 commit
-
-
Oleg Drokin authored
commit 95745e9b ("staging: lustre: Use kasprintf.") introduced a copy and paste error causing two different obd types to be assigned same content causing lustre to fail on mount with a warning from procfs followed by a bizzare error about OST not having enough MDS capabilities. This patch unbreaks Lustre client again. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> CC: Navya Sri Nizamkari <navyasri.tech@gmail.com> CC: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
- 02 Mar, 2015 32 commits
-
-
Joe Perches authored
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Convert these uses to: seq_printf(seq, ...); return 0; Done via cocci script: @@ struct seq_file *seq; int i; @@ - i = seq_printf(seq, + seq_printf(seq, ...); ... - return i; + return 0; @@ struct seq_file *seq; int i; @@ - i = 0; - i += seq_printf(seq, + seq_printf(seq, ...); ... - return i; + return 0; With some additional reformatting and typing post conversion to remove the now unnecessary "int i;" declaration. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Tolga Ceylan authored
Code reformatting based on checkpatch.pl with --strict: Comparison to NULL rewritten as !indio_dev Signed-off-by:
Tolga Ceylan <tolga.ceylan@gmail.com> Signed-off-by:
-
Tolga Ceylan authored
Code reformatting based on checkpatch.pl with --strict: Lines over 80 characters were fixed Signed-off-by:
-
Tolga Ceylan authored
Code reformatting based on checkpatch.pl with --strict: Alignment should match open paranthesis cases corrected Signed-off-by:
-
Ian Abbott authored
ADLINK's MS Windows drivers for the PCI-6208/6216 boards include the following line in the DDInstall secion of the INF file: %String6208%=DriverInstall6208.NT,PCI\VEN_10B5&DEV_9050&SUBSYS_62089999 That's for a PLX PCI 9050/9052 PCI interface chip with custom subvendor and subdevice ID. The "%String6208%" macro expands to "ADLINK PCI-6208" in the INF file. Add a corresponding entry to this driver module's PCI device table. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
This driver module now only supports a single board type, so remove the infrastructure for describing multiple board types. The comedi "auto_attach" handler, `pci6208_auto_attach()` doesn't need to set the comedi device's `board_name` or `board_ptr` members. The former is automatically pointed to the comedi driver's `driver_name` by the core comedi module, and the latter is not used anywhere else. The AO subdevice's `n_chans` member can be set to 16 without looking it up in the single element of `pci6208_boards[]`. There is no need to pass a board index from the PCI device table to the "auto_attach" handler. Signed-off-by:
-
Ian Abbott authored
This module's PCI device table has separate PCI device IDs for PCI-6208 and PCI-6216, but in reality, both boards and their cPCI and PCIe variants seem to have the same PCI device ID: 0x6208. The PCI subdevice ID doesn't seem to help either. It shouldn't do any harm to claim 16 AO channels for all devices supported by this driver. The original PCI-6216 is just a PCI-6208 with a daughter board providing the extra DACs. The data is clocked out to the DACs serially with no acknowledgment. I assume this would still happen when the DACs for the upper 8 channels are missing. Therefore, change the driver to support a single board type with 16 AO channels, and remove the suspicious PCI device ID for the PCI-6216. Evidence about lack of a separate PCI device ID for PCI-6216 follows.... 1. Jesus Vasquez reports the following lspci output for a PCIe-6216 on his Ubuntu 12.04 system: lspci -n -vvv 07:00.0 1180: 144a:6208 (rev 02) Subsystem: 144a:6208 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=128] Region 1: I/O ports at c100 [size=128] Region 2: I/O ports at c000 [size=256] Kernel driver in use: adl_pci6208 Kernel modules: adl_pci6208 That system's "adl_pci6208" module only has the single PCI device ID for the PCI-6208, but works for his PCIe-6216 except that it only supports 8 analog output channels instead of 16. 2. ADLINK's binary Linux module "pci6208.ko" (there is no separate module for the PCI-6216) has a single alias: alias: pci:v0000144Ad00006208sv*sd*bc*sc*i* 3. The MS Windows drivers include this set of hardware IDs for the PCI-6208 series, with nothing more specific for the PCI-6216 (they are all tied to the same name "ADLINK PCI-6208" and there is no mention of PCI-6216): PCI\VEN_10B5&DEV_9050&SUBSYS_62089999 PCI\VEN_144A&DEV_6208&SUBSYS_6208144A PCI\VEN_144A&DEV_6208&SUBSYS_62089999 PCI\VEN_144A&DEV_6208&SUBSYS_C208144A PCI\VEN_144A&DEV_6208&SUBSYS_C20855AA PCI\VEN_144A&DEV_6208 Signed-off-by: -
H Hartley Sweeten authored
The hardware has an 8254 timer/counter. Channe; 0 is available as a generic counter/timer with the clock, gate, and output signals all availabe on the main 37 pin connector. Channels 1 and 2 are used for the pacer. Add support for the 8254 timer. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
-
H Hartley Sweeten authored
Add subdevices for the 4 digital input and 4 digital output channels on the main connector of the board. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, add some whitespace to the subdevice init. Remove the unnecessary comments as well as the initialization of the analog input subdevice 'len_chanlist'. That member is only used by subdevices that support async commands. For aesthetics, rename the analog input subdevice (*insn_read) function. Signed-off-by:
-
H Hartley Sweeten authored
The analog output range is not programmable. The DAC ranges are jumper-settable on the board. For aesthetics, provide a range table for the user with all possible ranges. Signed-off-by:
-
H Hartley Sweeten authored
Add defines for the registers and bits. Use the defines to remove the "magic" numbers. Signed-off-by:
-
H Hartley Sweeten authored
The hardware uses a switch on the board to select if the analog inputs are bipolar or uinipolar. The gain is programmable to allow the following input ranges: Gain Bipolar Unipolar 0 +/-10V 0 to 10V 1 +/-5V 0 to 5V 2 +/-2.5V 0 to 2.5V 3 +/-1.25V 0 to 1.25V Add the necessary code to the driver to allow the user to select the desired range. Signed-off-by: -
H Hartley Sweeten authored
The hardware uses a switch on the board to set the number of analog input channels to either 16 single-ended or 8 differential channels. Currently the switch setting is checked for every (*insn_read) operation to validate the channel number. Check the switch setting during the driver attach and initialize the subdevice accordingly. This allows the core to handle the validation. Signed-off-by:
-
H Hartley Sweeten authored
All the comedi drivers have been converted to use the comedi_8254 module to provide support for the 8254 timers. Remove this unused header. Signed-off-by:
-
H Hartley Sweeten authored
This driver uses an 8254 timer to generate the pacer clock used for analog input data conversion. Convert it to use the comedi_8254 module to provide support for the 8254 timer. The hardware actually has two 8254 devices. Timer B0 is the master for timed conversions, timer B1 sets the scan pacing, and tmer A0 sets the conversion pacing. For the conversion, dev->pacer is used for the "B" timers and a new private data member, dev->counter, is used for the "A" timers. All the divisor values are stored in the dev->pacer. Signed-off-by:
-
H Hartley Sweeten authored
Convert this driver to use the comedi_8254 module to provide the 8254 timer support. Add 'clock_src' and 'gate_src' members to the comedi_8254 data for convienence. Signed-off-by:
-
H Hartley Sweeten authored
Currently this driver uses a spinlock in the 8254 subdevice (*insn_read), (*insn_write), and (*insn_config) functions. The comedi core checks if the subdevice is 'busy', in parse_insn(), before any of the subdevice functions are attempted. Remove the unnecessary spinlock. Signed-off-by:
-
H Hartley Sweeten authored
The 'counter_number' in these functions is the comedi channel number from the chanspec. The comedi core validates the chanspec before calling the driver functions. Remove the unnecessary checks. Signed-off-by:
-
H Hartley Sweeten authored
This member is only used in the "set gate" and "set clock" helper functions. Remove it and calculate the value when needed. Signed-off-by:
-
H Hartley Sweeten authored
This member is only used one place in the driver. Remove it and calculate the register offset when needed. Signed-off-by:
-
H Hartley Sweeten authored
This member is only used one place in the driver. Remove it and calculate the register offset when needed. Signed-off-by:
-
H Hartley Sweeten authored
Replace the DIO200_[XYZ]GAT_SEL defines with a macro that returns the correct register offset. Signed-off-by:
-
H Hartley Sweeten authored
Replace the DIO200_[XYZ]CLK_SEL defines with a macro that returns the correct register offset. Signed-off-by:
-
H Hartley Sweeten authored
This driver uses an 8254 timer to generate the pacer clock used for analog input data conversion. Convert it to use the comedi_8254 module to provide support for the 8254 timer. Signed-off-by:
-
H Hartley Sweeten authored
This driver uses an 8254 timer to generate the pacer clock used for analog input data conversion. Convert it to use the comedi_8254 module to provide support for the 8254 timer. Signed-off-by:
-
H Hartley Sweeten authored
The hardware supported by this driver does not have an 8254 timer. Remove the unnecessary include of "8253.h". Signed-off-by:
-
H Hartley Sweeten authored
Some of the hardware supported by this driver include an 8254 timer. For aesthetics, convert it to use the comedi_8254 module to provide support for the 8254 timer. This also fixes the (*insn_read) and (*insn_write) to work like the comedi API expects. Currently they only read or write a single value. It also fixes the (*insn_config). Currently the driver is attempting to handle the configuration instructions GPCT_RESET and GPCT_SET_OPERATION. These are just arbitrary valuse and are not real comedi configuration_ids. They actually coorespond to: GPCT_RESET -> INSN_CONFIG_DIO_OUTPUT GPCT_SET_OPERATION -> INSN_CONFIG_ANALOG_TRIG The number of parameters for the instructions is validated by the comedi core in check_insn_config_length(). GPCT_RESET happens to work (insn->n == 1) but GPCT_SET_OPERATION would fail. The INSN_CONFIG_ANALOG_TRIG expects insn->n == 5 but GPCT_SET_OPERATION in this driver expects insn->n == 2. Signed-off-by:
-
H Hartley Sweeten authored
Some of the hardware supported by this driver includes an 8254 timer. For aesthetics, convert it to use the comedi_8254 module to provide support for the 8254 timer. Signed-off-by:
-
H Hartley Sweeten authored
The boardinfo for the 8254 timer is overly complex. The 8254 timer always has 3 channels and the 'regs' and 'specflags' members of diosubd_data are not used. The only necessary information is the base 'addr' offset to the 8254 registers. Replace the 's8254' member with an unsigned long 'timer_regbase'. Use that to determine if the board has an 8254 timer during the attach of the driver. Save the 'timer_regbase' in the subdevice 'private' pointer to use in the subdevice functions. For aesthetics, absorb pci_dio_add_8254() into the driver attach function. Signed-off-by:
-
H Hartley Sweeten authored
Only two of the boards supported by this driver have an 8254 counter/timer. Both of these boards have a single 8254 device. Currently the counter subdevice functions are coded to support multiple 8254 devices. This is unnecessary and just complicates the code. Simplfy the subdevice functions to work for a single 8254 counter/timer and refactor the driver (*attach) accordingly. Signed-off-by:
-
H Hartley Sweeten authored
This driver uses an 8254 timer to generate the pacer clock used for analog input data conversion. Convert it to use the comedi_8254 module to provide support for the 8254 timer. Tidy up the (*do_cmdtest) validation of the timer arguments. Absorb the converted das1800_setup_counters() code into the (*do_cmd). Signed-off-by:
-
