Pull USB fixes from Greg KH:
 "Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6.

  Nothing huge in here, just the normal collection of gadget, dwc2/3,
  serial, and other minor USB driver fixes and id additions. Full
  details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: iuu_phoenix: fix memory corruption
  USB: c67x00: fix use after free in c67x00_giveback_urb
  usb: gadget: function: fix missing spinlock in f_uac1_legacy
  usb: gadget: udc: atmel: fix uninitialized read in debug printk
  usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()
  usb: dwc2: Fix shutdown callback in platform
  usb: cdns3: trace: fix some endian issues
  usb: cdns3: ep0: fix some endian issues
  usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
  usb: gadget: fix langid kernel-doc warning in usbstring.c
  usb: dwc3: pci: add support for the Intel Jasper Lake
  usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
  usb: chipidea: core: add wakeup support for extcon
  USB: serial: option: add Quectel EG95 LTE modem
  thunderbolt: Fix path indices used in USB3 tunnel discovery
  USB: serial: ch341: add new Product ID for CH340
  USB: serial: option: add GosunCn GM500 series
  USB: serial: cypress_m8: enable Simply Automated UPB PIM

Pull dma-mapping fixes from Christoph Hellwig:
 "Ensure we always have fully addressable memory in the dma coherent
  pool (Nicolas Saenz Julienne)"

* tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping:
  dma-pool: do not allocate pool memory from CMA
  dma-pool: make sure atomic pool suits device
  dma-pool: introduce dma_guess_pool()
  dma-pool: get rid of dma_in_atomic_pool()
  dma-direct: provide function to check physical memory area validity

Pull SCSI fix from James Bottomley:
 "One small driver fix. Although the one liner makes it sound like a
  cosmetic change, it's a regression fix for the megaraid_sas driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro

Merge tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging into master

Pull hwmon fixes from Guenter Roeck:

 - Using SCT on some Tohsiba drives causes firmware hangs. Disable its
   use in the drivetemp driver.

 - Handle potential buffer overflows in scmi and aspeed-pwm-tacho
   driver.

 - Energy reporting does not work well on all AMD CPUs. Restrict
   amd_energy to known working models.

 - Enable reading the CPU temperature on NCT6798D using undocumented
   registers.

 - Fix read errors seen if PEC is enabled in adm1275 driver.

 - Fix setting the pwm1_enable in emc2103 driver.

* tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
  hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
  hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
  hwmon: (adm1275) Make sure we are reading enough data for different chips
  hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
  hwmon: (amd_energy) match for supported models
  hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow

Merge tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master

Pull RISC-V fixes from Palmer Dabbelt:
 "Two fixes:

   - 16KiB kernel stacks on rv64, which fixes a lot of crashes.

   - Rolling an mmiowb() into the scheduler, which when combined with
     Will's fix to the mmiowb()-on-spinlock should fix the PREEMPT
     issues we've been seeing"

* tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
  riscv: use 16KB kernel stack on 64-bit

Merge tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.8:

   - A fix to the VAS code we merged this cycle, to report the proper
     error code to userspace for address translation failures. And a
     selftest update to match.

   - Another fix for our pkey handling of PROT_EXEC mappings.

   - A fix for a crash when booting a "secure VM" under an ultravisor
     with certain numbers of CPUs.

  Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
  Das, Satheesh Rajendran, Thiago Jung Bauermann"

* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Use proper error code to check fault address
  powerpc/vas: Report proper error code for address translation failure
  powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
  powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey

It has been observed that Toshiba DT01ACA family drives have
WRITE FPDMA QUEUED command timeouts and sometimes just freeze until
power-cycled under heavy write loads when their temperature is getting
polled in SCT mode. The SMART mode seems to be fine, though.

Let's make sure we don't use SCT mode for these drives then.

While only the 3 TB model was actually caught exhibiting the problem let's
play safe here to avoid data corruption and extend the ban to the whole
family.

Fixes: 5b46903d ("hwmon: Driver for disk and solid state drives with temperature sensors")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.nameSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull NFS client fixes from Anna Schumaker:
 "A few more NFS client bugfixes for Linux 5.8:

  NFS:
   - Fix interrupted slots by using the SEQUENCE operation

  SUNRPC:
   - revert d03727b2 to fix unkillable IOs

  xprtrdma:
   - Fix double-free in rpcrdma_ep_create()
   - Fix recursion into rpcrdma_xprt_disconnect()
   - Fix return code from rpcrdma_xprt_connect()
   - Fix handling of connect errors
   - Fix incorrect header size calculations"

* tag 'nfs-for-5.8-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC reverting d03727b2 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
  xprtrdma: fix incorrect header size calculations
  NFS: Fix interrupted slots by sending a solo SEQUENCE operation
  xprtrdma: Fix handling of connect errors
  xprtrdma: Fix return code from rpcrdma_xprt_connect()
  xprtrdma: Fix recursion into rpcrdma_xprt_disconnect()
  xprtrdma: Fix double-free in rpcrdma_ep_create()

Pull ARM SoC fixes from Arnd Bergmann:
 "This time there are a number of actual code fixes, plus a small set of
  device tree issues getting addressed:

  Renesas:

    - one defconfig cleanup to allow a later Kconfig change

  Intel socfpga:

    - enable QSPI devices on some machines

    - fix DTC validation warnings

  TI OMAP:

    - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target
      module driver

    - A regression fix for ti-sysc no-idle handling that caused issues
      compared to earlier platform data based booting

    - A fix for memory leak for omap_hwmod_allocate_module

    - Fix d_can driver probe for am437x

  NXP i.MX:

    - A couple of fixes on i.MX platform device registration code to
      stop the use of invalid IRQ 0.

    - Fix a regression seen on ls1021a platform, caused by commit
      52102a3b ("soc: imx: move cpu code to drivers/soc/imx").

    - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.

  Amlogic Meson:

    - misc DT fixes

    - SoC ID fixes to detect all chips correctly"

* tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
  ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
  arm64: dts: stratix10: increase QSPI reg address in nand dts file
  arm64: dts: stratix10: add status to qspi dts node
  arm64: dts: agilex: add status to qspi dts node
  ARM: dts: Fix dcan driver probe failed on am437x platform
  ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
  arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
  soc: imx: check ls1021a
  ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
  ARM: imx: Provide correct number of resources when registering gpio devices
  ARM: dts: imx6qdl-gw551x: fix audio SSI
  bus: ti-sysc: Do not disable on suspend for no-idle
  bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
  bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
  ARM: dts: meson: Align L2 cache-controller nodename with dtschema
  arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
  arm64: dts: meson: add missing gxl rng clock
  soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's

Pull arm64 fixes from Will Deacon:
 "A batch of arm64 fixes.

  Although the diffstat is a bit larger than we'd usually have at this
  stage, a decent amount of it is the addition of comments describing
  our syscall tracing behaviour, and also a sweep across all the modular
  arm64 PMU drivers to make them rebust against unloading and unbinding.

  There are a couple of minor things kicking around at the moment (CPU
  errata and module PLTs for very large modules), but I'm not expecting
  any significant changes now for us in 5.8.

   - Fix kernel text addresses for relocatable images booting using EFI
     and with KASLR disabled so that they match the vmlinux ELF binary.

   - Fix unloading and unbinding of PMU driver modules.

   - Fix generic mmiowb() when writeX() is called from preemptible
     context (reported by the riscv folks).

   - Fix ptrace hardware single-step interactions with signal handlers,
     system calls and reverse debugging.

   - Fix reporting of 64-bit x0 register for 32-bit tasks via
     'perf_regs'.

   - Add comments describing syscall entry/exit tracing ABI"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  drivers/perf: Prevent forced unbinding of PMU drivers
  asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible()
  arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
  arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter()
  arm64: syscall: Expand the comment about ptrace and syscall(-1)
  arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI
  arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return
  arm64: ptrace: Override SPSR.SS when single-stepping is enabled
  arm64: ptrace: Consistently use pseudo-singlestep exceptions
  drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling
  efi/libstub/arm64: Retain 2MB kernel Image alignment if !KASLR

Reverting commit d03727b2 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).

The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull io_uring fix from Jens Axboe:
 "Fix for a case where, with automatic buffer selection, we can leak the
  buffer descriptor for recvmsg"

* tag 'io_uring-5.8-2020-07-17' of git://git.kernel.dk/linux-block:
  io_uring: fix recvmsg memory leak with buffer selection

Pull block fix from Jens Axboe:
 "Single NVMe multipath capacity fix"

* tag 'block-5.8-2020-07-17' of git://git.kernel.dk/linux-block:
  nvme: explicitly update mpath disk capacity on revalidation

Merge tag 'fuse-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse into master

Pull fuse fixes from Miklos Szeredi:

 - two regressions in this cycle caused by the conversion of writepage
   list to an rb_tree

 - two regressions in v5.4 cause by the conversion to the new mount API

 - saner behavior of fsconfig(2) for the reconfigure case

 - an ancient issue with FS_IOC_{GET,SET}FLAGS ioctls

* tag 'fuse-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS
  fuse: don't ignore errors from fuse_writepages_fill()
  fuse: clean up condition for writepage sending
  fuse: reject options on reconfigure via fsconfig(2)
  fuse: ignore 'data' argument of mount(..., MS_REMOUNT)
  fuse: use ->reconfigure() instead of ->remount_fs()
  fuse: fix warning in tree_insert() and clean up writepage insertion
  fuse: move rb_erase() before tree_insert()

Merge tag 'ovl-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs into master

Pull overlayfs fixes from Miklos Szeredi:

 - fix a regression introduced in v4.20 in handling a regenerated
   squashfs lower layer

 - two regression fixes for this cycle, one of which is Oops inducing

 - miscellaneous issues

* tag 'ovl-fixes-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix lookup of indexed hardlinks with metacopy
  ovl: fix unneeded call to ovl_change_flags()
  ovl: fix mount option checks for nfs_export with no upperdir
  ovl: force read-only sb on failure to create index dir
  ovl: fix regression with re-formatted lower squashfs
  ovl: fix oops in ovl_indexdir_cleanup() with nfs_export=on
  ovl: relax WARN_ON() when decoding lower directory file handle
  ovl: remove not used argument in ovl_check_origin
  ovl: change ovl_copy_up_flags static
  ovl: inode reference leak in ovl_is_inuse true case.

Merge tag 'spi-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into master

Pull spi fixes from Mark Brown:
 "A couple of small driver specific fixes for fairly minor issues"

* tag 'spi-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate
  spi: mediatek: use correct SPI_CFG2_REG MACRO

Merge tag 'regulator-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into master

Pull regulator fixes from Mark Brown:
 "The more substantial fix here is the rename of the da903x driver which
  fixes a collision with the parent MFD driver name which caused issues
  when things were built as modules.

  There's also a fix for a mislableled regulator on the pmi8994 which is
  quite important for systems with that device"

* tag 'regulator-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  MAINTAINERS: remove obsolete entry after file renaming
  regulator: rename da903x to da903x-regulator
  regulator: qcom_smd: Fix pmi8994 label

Merge tag 'regmap-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into master

Pull regmap fixes from Mark Brown:
 "A couple of substantial fixes here, one from Doug which fixes the
  debugfs code for MMIO regmaps (fortunately not the common case) and
  one from Marc fixing lookups of multiple regmaps for the same device
  (a very unusual case).

  There's also a fix for Kconfig to ensure we enable SoundWire properly"

* tag 'regmap-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Don't sleep while atomic for fast_io regmaps
  regmap: add missing dependency on SoundWire
  regmap: dev_get_regmap_match(): fix string comparison

Pull HID fixes from Jiri Kosina:

 - linked list race condition fix in hid-steam driver from Rodrigo Rivas
   Costa

 - assorted deviceID-specific quirks and other small cosmetic cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: avoid repeated "multiplier = " log messages
  HID: logitech: Use HIDPP_RECEIVER_INDEX instead of 0xff
  HID: quirks: Ignore Simply Automated UPB PIM
  HID: apple: Disable Fn-key key-re-mapping on clone keyboards
  MAINTAINERS: update uhid and hid-wiimote entry
  HID: steam: fixes race in handling device list.
  HID: magicmouse: do not set up autorepeat
  HID: alps: support devices with report id 2
  HID: quirks: Always poll Obins Anne Pro 2 keyboard
  HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override

While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Merge tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes

arm/arm64: dts: socfpga: fixes for v5.8
- Add status = "okay" in QSPI
- Increase QSPI size in reg property
- Fix dtschema for SoCFPGA platforms

* tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
  ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
  arm64: dts: stratix10: increase QSPI reg address in nand dts file
  arm64: dts: stratix10: add status to qspi dts node
  arm64: dts: agilex: add status to qspi dts node

Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes

Renesas fixes for v5.8

  - Replace CONFIG_PCIE_RCAR by CONFIG_PCIE_RCAR_HOST in the defconfig,
    to unblock a planned Kconfig change.

* tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST

Link: https://lore.kernel.org/r/20200717100523.15418-1-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull sound fixes from Takashi Iwai:
 "No surprise here, just a few device-specific small fixes: two fixes
  for USB LINE6 and one for USB-audio drivers wrt syzkaller fuzzer
  issues, while the rest are all HD-audio Realtek quirks"

* tag 'sound-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - fixup for yet another Intel reference board
  ALSA: hda/realtek - Enable Speaker for ASUS UX563
  ALSA: hda/realtek - Enable Speaker for ASUS UX533 and UX534
  ALSA: hda/realtek: Enable headset mic of Acer TravelMate B311R-31 with ALC256
  ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G14(G401) series with ALC289
  ALSA: hda/realtek - change to suitable link model for ASUS platform
  ALSA: usb-audio: Fix race against the error recovery URB submission
  ALSA: line6: Sync the pending work cancel at disconnection
  ALSA: line6: Perform sanity check for each URB creation

Forcefully unbinding PMU drivers during perf sampling will lead to
a kernel panic, because the perf upper-layer framework call a NULL
pointer in this situation.

To solve this issue, "suppress_bind_attrs" should be set to true, so
that bind/unbind can be disabled via sysfs and prevent unbinding PMU
drivers during perf sampling.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.comSigned-off-by: Will Deacon <will@kernel.org>

Although mmiowb() is concerned only with serialising MMIO writes occuring
in contexts where a spinlock is held, the call to mmiowb_set_pending()
from the MMIO write accessors can occur in preemptible contexts, such
as during driver probe() functions where ordering between CPUs is not
usually a concern, assuming that the task migration path provides the
necessary ordering guarantees.

Unfortunately, the default implementation of mmiowb_set_pending() is not
preempt-safe, as it makes use of a a per-cpu variable to track its
internal state. This has been reported to generate the following splat
on riscv:

 | BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
 | caller is regmap_mmio_write32le+0x1c/0x46
 | CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1
 | Call Trace:
 |  walk_stackframe+0x0/0x7a
 |  dump_stack+0x6e/0x88
 |  regmap_mmio_write32le+0x18/0x46
 |  check_preemption_disabled+0xa4/0xaa
 |  regmap_mmio_write32le+0x18/0x46
 |  regmap_mmio_write+0x26/0x44
 |  regmap_write+0x28/0x48
 |  sifive_gpio_probe+0xc0/0x1da

Although it's possible to fix the driver in this case, other splats have
been seen from other drivers, including the infamous 8250 UART, and so
it's better to address this problem in the mmiowb core itself.

Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb
state and then only updating the 'mmiowb_pending' field if we are not
preemptible (i.e. we have a non-zero nesting count).

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.orgSigned-off-by: Will Deacon <will@kernel.org>

Pull drm fixes from Dave Airlie:
 "Weekly fixes pull, big bigger than I'd normally like, but they are
  fairly scattered and small individually.

  The vmwgfx one is a black screen regression, otherwise the largest is
  an MST encoder fix for amdgpu which results in a WARN in some cases,
  and a scattering of i915 fixes.

  I'm tracking two regressions at the moment that hopefully we get
  nailed down this week for rc7.

  dma-buf:
   - sleeping atomic fix

  amdgpu:
   - Fix a race condition with KIQ
   - Preemption fix
   - Fix handling of fake MST encoders
   - OLED panel fix
   - Handle allocation failure in stream construction
   - Renoir SMC fix
   - SDMA 5.x fix

  i915:
   - FBC w/a stride fix
   - Fix use-after-free fix on module reload
   - Ignore irq enabling on the virtual engines to fix device sleep
   - Use GTT when saving/restoring engine GPR
   - Fix selftest sort function

  vmwgfx:
   - black screen fix

  aspeed:
   - fbcon init warn fix"

* tag 'drm-fixes-2020-07-17-1' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu/sdma5: fix wptr overwritten in ->get_wptr()
  drm/amdgpu/powerplay: Modify SMC message name for setting power profile mode
  drm/amd/display: handle failed allocation during stream construction
  drm/amd/display: OLED panel backlight adjust not work with external display connected
  drm/amdgpu/display: create fake mst encoders ahead of time (v4)
  drm/amdgpu: fix preemption unit test
  drm/amdgpu/gfx10: fix race condition for kiq
  drm/i915: Recalculate FBC w/a stride when needed
  drm/i915: Move cec_notifier to intel_hdmi_connector_unregister, v2.
  drm/i915/gt: Only swap to a random sibling once upon creation
  drm/i915/gt: Ignore irq enabling on the virtual engines
  drm/i915/perf: Use GTT when saving/restoring engine GPR
  drm/i915/selftests: Fix compare functions provided for sorting
  drm/vmwgfx: fix update of display surface when resolution changes
  dmabuf: use spinlock to access dmabuf->name
  drm/aspeed: Call drm_fbdev_generic_setup after drm_dev_register

Merge tag 'amd-drm-fixes-5.8-2020-07-15' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.8-2020-07-15:

amdgpu:
- Fix a race condition with KIQ
- Preemption fix
- Fix handling of fake MST encoders
- OLED panel fix
- Handle allocation failure in stream construction
- Renoir SMC fix
- SDMA 5.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200715213914.3994-1-alexander.deucher@amd.com

Merge tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.8-rc cycle

Few fixes for issues noticed during testing:

- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
  driver

- A regression fix for ti-sysc no-idle handling that caused issues
  compared to earlier platform data based booting

- A fix for memory leak for omap_hwmod_allocate_module

- Fix d_can driver probe for am437x

* tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix dcan driver probe failed on am437x platform
  ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
  bus: ti-sysc: Do not disable on suspend for no-idle
  bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
  bus: ti-sysc: Fix wakeirq sleeping function called from invalid context

Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.8, round 2:

- A couple of fixes on i.MX platform device registration code to stop
  the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
  52102a3b ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.

* tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: check ls1021a
  ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
  ARM: imx: Provide correct number of resources when registering gpio devices
  ARM: dts: imx6qdl-gw551x: fix audio SSI

Link: https://lore.kernel.org/r/20200714145649.GP15718@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes

Amlogic fixes for v5.8-rc
- misc DT fixes, and SoC ID fixes

* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: Align L2 cache-controller nodename with dtschema
  arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
  arm64: dts: meson: add missing gxl rng clock
  soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's

Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

If a regmap has "fast_io" set then its lock function uses a spinlock.
That doesn't work so well with the functions:
* regmap_cache_only_write_file()
* regmap_cache_bypass_write_file()

Both of the above functions have the pattern:
1. Lock the regmap.
2. Call:
   debugfs_write_file_bool()
     copy_from_user()
       __might_fault()
         __might_sleep()

Let's reorder things a bit so that we do all of our sleepable
functions before we grab the lock.

Fixes: d3dc5430 ("regmap: debugfs: Allow writes to cache state settings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeidSigned-off-by: Mark Brown <broonie@kernel.org>

Pull power management fixes from Rafael Wysocki:
 "Add missing handling of a command line switch to the intel_pstate
  driver (Rafael Wysocki) and fix the freeing of the operating
  performance point (OPP) entries for the legacy (v1) OPP table type
  (Walter Lozano)"

* tag 'pm-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  opp: Increase parsed_static_opps in _of_add_opp_table_v1()
  cpufreq: intel_pstate: Fix active mode setting from command line

Merge tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master

Pull char/misc fixes from Greg KH:
 "Here are number of small char/misc driver fixes for 5.8-rc6

  Not that many complex fixes here, just a number of small fixes for
  reported issues, and some new device ids. Nothing fancy.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
  intel_th: Fix a NULL dereference when hub driver is not loaded
  intel_th: pci: Add Emmitsburg PCH support
  intel_th: pci: Add Tiger Lake PCH-H support
  intel_th: pci: Add Jasper Lake CPU support
  virt: vbox: Fix guest capabilities mask check
  virt: vbox: Fix VBGL_IOCTL_VMMDEV_REQUEST_BIG and _LOG req numbers to match upstream
  uio_pdrv_genirq: fix use without device tree and no interrupt
  uio_pdrv_genirq: Remove warning when irq is not specified
  coresight: etmv4: Fix CPU power management setup in probe() function
  coresight: cti: Fix error handling in probe
  Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
  mei: bus: don't clean driver pointer
  misc: atmel-ssc: lock with mutex instead of spinlock
  phy: sun4i-usb: fix dereference of pointer phy0 before it is null checked
  phy: rockchip: Fix return value of inno_dsidphy_probe()
  phy: ti: j721e-wiz: Constify structs
  phy: ti: am654-serdes: Constify regmap_config
  phy: intel: fix enum type mismatch warning
  phy: intel: Fix compilation error on FIELD_PREP usage
  ...

Merge tag 'driver-core-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master

Pull driver core fixes from Greg KH:
 "Here are 3 driver core fixes for 5.8-rc6.

  They resolve some issues found with the deferred probe code for some
  types of devices on some embedded systems. They have been tested a
  bunch and have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  driver core: Avoid deferred probe due to fw_devlink_pause/resume()
  driver core: Rename dev_links_info.defer_sync to defer_hook
  driver core: Don't do deferred probe in parallel with kernel_init thread

Merge tag 'staging-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master

Pull IIO and staging driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 5.8-rc6.

  The majority of fixes are for IIO drivers, resolving a number of small
  reported issues, and there are some counter fixes in here too that
  were tied to the IIO fixes. There's only one staging driver fix here,
  a comedi fix found by code inspection.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: verify array index is correct before using it
  iio: adc: ad7780: Fix a resource handling path in 'ad7780_probe()'
  iio:pressure:ms5611 Fix buffer element alignment
  iio:humidity:hts221 Fix alignment and data leak issues
  iio:humidity:hdc100x Fix alignment and data leak issues
  iio:magnetometer:ak8974: Fix alignment and data leak issues
  iio: adc: adi-axi-adc: Fix object reference counting
  iio: pressure: zpa2326: handle pm_runtime_get_sync failure
  counter: 104-quad-8: Add lock guards - filter clock prescaler
  counter: 104-quad-8: Add lock guards - differential encoder
  iio: core: add missing IIO_MOD_H2/ETHANOL string identifiers
  iio: magnetometer: ak8974: Fix runtime PM imbalance on error
  iio: mma8452: Add missed iio_device_unregister() call in mma8452_probe()
  iio:health:afe4404 Fix timestamp alignment and prevent data leak.
  iio:health:afe4403 Fix timestamp alignment and prevent data leak.

Pull tty/serial driver fixes from Greg KH:
 :Here are some small tty and serial driver fixes for 5.8-rc6.

  The largest set of patches in here is a revert of the sysrq changes
  that went into 5.8-rc1 but turned out to cause a noticable overhead
  and cpu usage.

  Other than that, there's a few small serial driver fixes to resolve
  reported issues, and finally resolving the spinlock init problem on
  many serial driver consoles.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: core: Initialise spin lock before use in uart_configure_port()
  serial: mxs-auart: add missed iounmap() in probe failure and remove
  serial: sh-sci: Initialize spinlock for uart console
  Revert "tty: xilinx_uartps: Fix missing id assignment to the console"
  serial: core: drop redundant sysrq checks
  serial: core: fix sysrq overhead regression
  Revert "serial: core: Refactor uart_unlock_and_check_sysrq()"
  tty/serial: fix serial_core.c kernel-doc warnings
  tty: serial: cpm_uart: Fix behaviour for non existing GPIOs

Merge tag 'thermal-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux into master

Pull thermal fixes from Daniel Lezcano:

 - Fix invalid index array access on int340x_thermal leading to a kernel
   panic (Bartosz Szczepanek)

 - Fix debug message level to prevent flooding on some platform (Alex
   Hung)

 - Fix invalid bank access by reverting "thermal: mediatek: fix register
   index error" (Enric Balletbo i Serra)

* tag 'thermal-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  Revert "thermal: mediatek: fix register index error"
  thermal: int3403_thermal: Downgrade error message
  thermal/int340x_thermal: Prevent page fault on .set_mode() op

* pm-cpufreq:
  cpufreq: intel_pstate: Fix active mode setting from command line

Merge tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.8-rc6

Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix.

* tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: iuu_phoenix: fix memory corruption

Pull NVMe fix from Christoph.

* 'nvme-5.8' of git://git.infradead.org/nvme:
  nvme: explicitly update mpath disk capacity on revalidation