Pull misc build failure fixes from Mike Rapoport:
 "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze.

  Some configurations of ia64 and microblaze use min_low_pfn and
  max_low_pfn in pfn_valid(). This causes build failures for modules
  that use pfn_valid().

  The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
  microblaze"

* tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  ia64: fix min_low_pfn/max_low_pfn build errors
  microblaze: fix min_low_pfn/max_low_pfn build errors

Pull affs fix from David Sterba:
 "One fix to make permissions work the same way as on AmigaOS"

* tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: fix basic permission bits to actually work

Pull media fixes from Mauro Carvalho Chehab:

 - a compilation fix issue with ti-vpe on arm 32 bits

 - two Kconfig fixes for imx214 and max9286 drivers

 - a kernel information leak at v4l2-core on time32 compat ioctls

 - some fixes at rc core unbind logic

 - a fix at mceusb driver for it to not use GFP_ATOMIC

 - fixes at cedrus and vicodec drivers at the control handling logic

 - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock

* tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: mceusb: Avoid GFP_ATOMIC where it is not needed
  media: gpio-ir-tx: spinlock is not needed to disable interrupts
  media: rc: do not access device via sysfs after rc_unregister_device()
  media: rc: uevent sysfs file races with rc_unregister_device()
  media: max9286: Depend on OF_GPIO
  media: i2c: imx214: select V4L2_FWNODE
  media: cedrus: Add missing v4l2_ctrl_request_hdl_put()
  media: vicodec: add missing v4l2_ctrl_request_hdl_put()
  media: media/v4l2-core: Fix kernel-infoleak in video_put_user()
  media: ti-vpe: cal: Fix compilation on 32-bit ARM

Pull HID fixes from Jiri Kosina:

 - data sanitization and validtion fixes for report descriptor parser
   from Marc Zyngier

 - memory leak fix for hid-elan driver from Dinghao Liu

 - two device-specific quirks

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: core: Sanitize event code and type when mapping input
  HID: core: Correctly handle ReportSize being zero
  HID: elan: Fix memleak in elan_input_configured
  HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller
  HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices

Merge tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - writecache fix to allow dax_direct_access() to partitioned pmem
   devices.

 - multipath fix to avoid any Path Group initialization if
   'pg_init_in_progress' isn't set.

 - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures.

 - integrity fix to properly check integrity after device creation when
   in bitmap mode.

 - thinp and cache target __create_persistent_data_objects() fixes to
   reset the metadata's dm_block_manager pointer from PTR_ERR to NULL
   before returning from error path.

 - persistent-data block manager fix to guard against dm_block_manager
   NULL pointer dereference in dm_bm_is_read_only() and update various
   opencoded bm->read_only checks to use dm_bm_is_read_only() instead.

* tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin metadata: Fix use-after-free in dm_bm_set_read_only
  dm thin metadata:  Avoid returning cmd->bm wild pointer on error
  dm cache metadata: Avoid returning cmd->bm wild pointer on error
  dm integrity: fix error reporting in bitmap mode after creation
  dm crypt: Initialize crypto wait structures
  dm mpath: fix racey management of PG initialization
  dm writecache: handle DAX to partitions on persistent memory correctly

Pull xfs fixes from Darrick Wong:
 "Various small corruption fixes that have come in during the past
  month:

   - Avoid a log recovery failure for an insert range operation by
     rolling deferred ops incrementally instead of at the end.

   - Fix an off-by-one error when calculating log space reservations for
     anything involving an inode allocation or free.

   - Fix a broken shortform xattr verifier.

   - Ensure that the shortform xattr header padding is always
     initialized to zero"

* tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: initialize the shortform attr header padding entry
  xfs: fix boundary test in xfs_attr_shortform_verify
  xfs: fix off-by-one in inode alloc block reservation calculation
  xfs: finish dfops on every insert range shift iteration

Pull epoll fixup from Al Viro:
 "Fixup for epoll regression; there's a better solution longer term, but
  this is the least intrusive fix"

* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix regression in "epoll: Keep a reference on files added to the check list"

The following error ocurred when testing disk online/offline:

[  301.798344] device-mapper: thin: 253:5: aborting current metadata transaction
[  301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction
[  301.849206] Aborting journal on device dm-26-8.
[  301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted
[  301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30
[  301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data]

Reason is:

 metadata_operation_failed
    abort_transaction
        dm_pool_abort_metadata
	    __create_persistent_data_objects
	        r = __open_or_format_metadata
	        if (r) --> If failed will free pmd->bm but pmd->bm not set NULL
		    dm_block_manager_destroy(pmd->bm);
    set_pool_mode
	dm_pool_metadata_read_only(pool->pmd);
	dm_bm_set_read_only(pmd->bm);  --> use-after-free

Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and
dm_bm_set_read_write functions.  If bm is NULL it means creating the
bm failed and so dm_bm_is_read_only must return true.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Maybe __create_persistent_data_objects() caller will use PTR_ERR as a
pointer, it will lead to some strange things.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

epoll_loop_check_proc() can run into a file already committed to destruction;
we can't grab a reference on those and don't need to add them to the set for
reverse path check anyway.
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: a9ed4a65 ("epoll: Keep a reference on files added to the check list")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'perf-tools-fixes-for-v5.9-2020-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix infinite loop in the TUI for grouped events in 'perf top/record',
   eg when using "perf top -e '{cycles,instructions,cache-misses}'".

 - Fix segfault by skipping side-band event setup if HAVE_LIBBPF_SUPPORT
   is not set.

 - Fix synthesized branch stacks generated from CoreSight ETM trace and
   Intel PT hardware traces.

 - Fix error when synthesizing events from ARM SPE hardware trace.

 - The SNOOPX and REMOTE offsets in the data_src bitmask in perf records
   were were both 37, SNOOPX is 38, fix it.

 - Fix use of CPU list with summary option in 'perf sched timehist'.

 - Avoid an uninitialized read when using fake PMUs.

 - Set perf_event_attr.exclude_guest=1 for user-space counting.

 - Don't order events when doing a 'perf report -D' raw dump of
   perf.data records.

 - Set NULL sentinel in pmu_events table in "Parse and process metrics"
   'perf test'

 - Fix basic bpf filtering 'perf test' on s390x.

 - Fix out of bounds array access in the 'perf stat' print_counters()
   evlist method.

 - Add mwait_idle_with_hints.constprop.0 to the list of idle symbols.

 - Use %zd for size_t printf formats on 32-bit.

 - Correct the help info of "perf record --no-bpf-event" option.

 - Add entries for CoreSight and Arm SPE tooling to MAINTAINERS.

* tag 'perf-tools-fixes-for-v5.9-2020-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf report: Disable ordered_events for raw dump
  perf tools: Correct SNOOPX field offset
  perf intel-pt: Fix corrupt data after perf inject from
  perf cs-etm: Fix corrupt data after perf inject from
  perf top/report: Fix infinite loop in the TUI for grouped events
  perf parse-events: Avoid an uninitialized read when using fake PMUs
  perf stat: Fix out of bounds array access in the print_counters() evlist method
  perf test: Set NULL sentinel in pmu_events table in "Parse and process metrics" test
  perf parse-events: Set exclude_guest=1 for user-space counting
  perf record: Correct the help info of option "--no-bpf-event"
  perf tools: Use %zd for size_t printf formats on 32-bit
  MAINTAINERS: Add entries for CoreSight and Arm SPE tooling
  perf: arm-spe: Fix check error when synthesizing events
  perf symbols: Add mwait_idle_with_hints.constprop.0 to the list of idle symbols
  perf top: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set
  perf sched timehist: Fix use of CPU list with summary option
  perf test: Fix basic bpf filtering test

Pull btrfs fixes from David Sterba:
 "Two small fixes and a bunch of lockdep fixes for warnings that show up
  with an upcoming tree locking update but are valid with current locks
  as well"

* tag 'for-5.9-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: tree-checker: fix the error message for transid error
  btrfs: set the lockdep class for log tree extent buffers
  btrfs: set the correct lockdep class for new nodes
  btrfs: allocate scrub workqueues outside of locks
  btrfs: fix potential deadlock in the search ioctl
  btrfs: drop path before adding new uuid tree entry
  btrfs: block-group: fix free-space bitmap threshold

Pull SCSI fixes from James Bottomley:
 "Three minor fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()
  scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu()
  scsi: qedf: Fix null ptr reference in qedf_stag_change_work

The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.

Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 468dfca3 ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto
wait structures declared on stack before their use with
crypto_wait_req().

Fixes: 39d13a1a ("dm crypt: reuse eboiv skcipher for IV generation")
Fixes: bbb16584 ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Commit 935fcc56 ("dm mpath: only flush workqueue when needed")
changed flush_multipath_work() to avoid needless workqueue
flushing (of a multipath global workqueue). But that change didn't
realize the surrounding flush_multipath_work() code should also only
run if 'pg_init_in_progress' is set.

Fix this by only doing all of flush_multipath_work()'s PG init related
work if 'pg_init_in_progress' is set.

Otherwise multipath_wait_for_pg_init_completion() will run
unconditionally but the preceeding flush_workqueue(kmpath_handlerd)
may not. This could lead to deadlock (though only if kmpath_handlerd
never runs a corresponding work to decrement 'pg_init_in_progress').

It could also be, though highly unlikely, that the kmpath_handlerd
work that does PG init completes before 'pg_init_in_progress' is set,
and then an intervening DM table reload's multipath_postsuspend()
triggers flush_multipath_work().

Fixes: 935fcc56 ("dm mpath: only flush workqueue when needed")
Cc: stable@vger.kernel.org
Reported-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

The function dax_direct_access doesn't take partitions into account,
it always maps pages from the beginning of the device. Therefore,
persistent_memory_claim() must get the partition offset using
get_start_sect() and add it to the page offsets passed to
dax_direct_access().
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 48debafe ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Fix min_low_pfn/max_low_pfn build errors for arch/ia64/: (e.g.)

 ERROR: "max_low_pfn" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!
 ERROR: "min_low_pfn" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!
 ERROR: "min_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
 ERROR: "max_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
 ERROR: "min_low_pfn" [drivers/crypto/cavium/nitrox/n5pf.ko] undefined!
 ERROR: "max_low_pfn" [drivers/crypto/cavium/nitrox/n5pf.ko] undefined!
 ERROR: "max_low_pfn" [drivers/md/dm-integrity.ko] undefined!
 ERROR: "min_low_pfn" [drivers/md/dm-integrity.ko] undefined!
 ERROR: "max_low_pfn" [crypto/tcrypt.ko] undefined!
 ERROR: "min_low_pfn" [crypto/tcrypt.ko] undefined!
 ERROR: "min_low_pfn" [security/keys/encrypted-keys/encrypted-keys.ko] undefined!
 ERROR: "max_low_pfn" [security/keys/encrypted-keys/encrypted-keys.ko] undefined!
 ERROR: "min_low_pfn" [arch/ia64/kernel/mca_recovery.ko] undefined!
 ERROR: "max_low_pfn" [arch/ia64/kernel/mca_recovery.ko] undefined!

David suggested just exporting min_low_pfn & max_low_pfn in
mm/memblock.c:
https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2006291911220.1118534@chino.kir.corp.google.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>

Disable ordered_events for report raw dump, because for raw dump we want
to see events as they are stored in the perf.data file, not sorted by
time.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200827134830.126721-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf_event.h has macros that define the field offsets in the data_src
bitmask in perf records. The SNOOPX and REMOTE offsets were both 37.

These are distinct fields, and the bitfield layout in perf_mem_data_src
confirms that SNOOPX should be at offset 38.

Committer notes:

This was extracted from a larger patch that also contained kernel
changes.

Fixes: 52839e65 ("perf tools: Add support for printing new mem_info encodings")
Signed-off-by: Al Grant <al.grant@arm.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/9974f2d0-bf7f-518e-d9f7-4520e5ff1bb0@foss.arm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 42bbabed ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.

Synthesized branch stacks generated from Intel PT were using the new
format, but not setting the event attribute, leading to consumers
seeing corrupt data. This patch fixes the issue by setting the event
attribute to indicate use of the new format.

Fixes: 42bbabed ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <al.grant@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20200819084751.17686-2-leo.yan@linaro.orgSigned-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Commit 42bbabed ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.

Synthesized branch stacks generated from CoreSight ETM trace were using
the new format, but not setting the event attribute, leading to
consumers seeing corrupt data. This patch fixes the issue by setting the
event attribute to indicate use of the new format.

Fixes: 42bbabed ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <al.grant@arm.com>
Reviewed-by: Andrea Brunato <andrea.brunato@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: http://lore.kernel.org/lkml/20200819084751.17686-1-leo.yan@linaro.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

For a while we need to have a dummy event for doing things like
receiving PERF_RECORD_COMM, PERF_RECORD_EXEC, etc for threads being
created and dying while we synthesize the pre-existing ones at tool
start.

This 'dummy' event is needed for keeping track of thread lifetime events
early in the session but are uninteresting otherwise, i.e. no need to
have it in a initial events menu for the non-grouped case, i.e. for:

 # perf top -e cycles,instructions

or even for plain:

 # perf top

When 'cycles' and that 'dummy' event are in place.

The code to remove that 'dummy' event ended up creating an endless loop
for the grouped case, i.e.:

 # perf top -e '{cycles,instructions}'

Fix it.

Fixes: bee9ca1c ("perf report TUI: Remove needless 'dummy' event from menu")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

With a fake_pmu the pmu_info isn't populated by perf_pmu__check_alias.
In this case, don't try to copy the uninitialized values to the evsel.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826042910.1902374-2-irogers@google.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Fix a compile error on F32 and gcc version 10.1 on s390 in file
utils/stat-display.c.  The error does not show up with make DEBUG=y.  In
fact the issue shows up when using both compiler options -O6 and
-D_FORTIFY_SOURCE=2 (which are omitted with DEBUG=Y).

This is the offending call chain:

print_counter_aggr()
  printout(config, -1, 0, ...)  with 2nd parm id set to -1
    aggr_printout(config, x, id --> -1, ...) which leads to this code:
		case AGGR_NONE:
                if (evsel->percore && !config->percore_show_thread) {
                        ....
                } else {
                        fprintf(config->output, "CPU%*d%s",
                                config->csv_output ? 0 : -7,
                                evsel__cpus(evsel)->map[id],
				                        ^^ id is -1 !!!!
                                config->csv_sep);
                }

This is a compiler inlining issue which is detected on s390 but not on
other plattforms.

Output before:

 # make util/stat-display.o
    .....

  util/stat-display.c: In function ‘perf_evlist__print_counters’:
  util/stat-display.c:121:4: error: array subscript -1 is below array
      bounds of ‘int[]’ [-Werror=array-bounds]
  121 |    fprintf(config->output, "CPU%*d%s",
      |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  122 |     config->csv_output ? 0 : -7,
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  123 |     evsel__cpus(evsel)->map[id],
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  124 |     config->csv_sep);
      |     ~~~~~~~~~~~~~~~~
  In file included from util/evsel.h:13,
                 from util/evlist.h:13,
                 from util/stat-display.c:9:
  /root/linux/tools/lib/perf/include/internal/cpumap.h:10:7:
  note: while referencing ‘map’
   10 |  int  map[];
      |       ^~~
  cc1: all warnings being treated as errors
  mv: cannot stat 'util/.stat-display.o.tmp': No such file or directory
  make[3]: *** [/root/linux/tools/build/Makefile.build:97: util/stat-display.o]
  Error 1
  make[2]: *** [Makefile.perf:716: util/stat-display.o] Error 2
  make[1]: *** [Makefile.perf:231: sub-make] Error 2
  make: *** [Makefile:110: util/stat-display.o] Error 2
  [root@t35lp46 perf]#

Output after:

  # make util/stat-display.o
    .....
  CC       util/stat-display.o
  [root@t35lp46 perf]#

Committer notes:

Removed the removal of {} enclosing the multiline else block, as pointed
out by Jiri Olsa.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200825063304.77733-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Linux 5.9 introduced perf test case "Parse and process metrics" and
on s390 this test case always dumps core:

  [root@t35lp67 perf]# ./perf test -vvvv -F 67
  67: Parse and process metrics                             :
  --- start ---
  metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
  parsing metric: inst_retired.any / cpu_clk_unhalted.thread
  Segmentation fault (core dumped)
  [root@t35lp67 perf]#

I debugged this core dump and gdb shows this call chain:

  (gdb) where
   #0  0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6
   #1  0x000003ffabc293de in strcasestr () from /lib64/libc.so.6
   #2  0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any",
            n=<optimized out>)
       at util/metricgroup.c:368
   #3  find_metric (map=<optimized out>, map=<optimized out>,
           metric=0x1e6ea20 "inst_retired.any")
      at util/metricgroup.c:765
   #4  __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0,
           metric_no_group=<optimized out>, m=<optimized out>)
      at util/metricgroup.c:844
   #5  resolve_metric (ids=0x0, map=0x0, metric_list=0x0,
          metric_no_group=<optimized out>)
      at util/metricgroup.c:881
   #6  metricgroup__add_metric (metric=<optimized out>,
        metric_no_group=metric_no_group@entry=false, events=<optimized out>,
        events@entry=0x3ffd84fb878, metric_list=0x0,
        metric_list@entry=0x3ffd84fb868, map=0x0)
      at util/metricgroup.c:943
   #7  0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>,
        metric_list=0x3ffd84fb868, events=0x3ffd84fb878,
        metric_no_group=<optimized out>, list=<optimized out>)
      at util/metricgroup.c:988
   #8  parse_groups (perf_evlist=perf_evlist@entry=0x1e70260,
          str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>,
          metric_no_merge=<optimized out>,
          fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>,
          metric_events=0x3ffd84fba58, map=0x1)
      at util/metricgroup.c:1040
   #9  0x0000000001103eb2 in metricgroup__parse_groups_test(
  	evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>,
  	str=str@entry=0x12f34b2 "IPC",
  	metric_no_group=metric_no_group@entry=false,
  	metric_no_merge=metric_no_merge@entry=false,
  	metric_events=0x3ffd84fba58)
      at util/metricgroup.c:1082
   #10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0,
          ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC",
  	vals=0x3ffd84fbad8, name=0x12f34b2 "IPC")
      at tests/parse-metric.c:159
   #11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8,
  	name=0x12f34b2 "IPC")
      at tests/parse-metric.c:189
   #12 test_ipc () at tests/parse-metric.c:208
.....
..... omitted many more lines

This test case was added with
commit 218ca91d ("perf tests: Add parse metric test for frontend metric").

When I compile with make DEBUG=y it works fine and I do not get a core dump.

It turned out that the above listed function call chain worked on a struct
pmu_event array which requires a trailing element with zeroes which was
missing. The marco map_for_each_event() loops over that array tests for members
metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes
the issue.

Output after:

  [root@t35lp46 perf]# ./perf test 67
  67: Parse and process metrics                             : Ok
  [root@t35lp46 perf]#

Committer notes:

As Ian remarks, this is not s390 specific:

<quote Ian>
  This also shows up with address sanitizer on all architectures
  (perhaps change the patch title) and perhaps add a "Fixes: <commit>"
  tag.

  =================================================================
  ==4718==ERROR: AddressSanitizer: global-buffer-overflow on address
  0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp
  0x7ffd24327c58
  READ of size 8 at 0x55c93b4d59e8 thread T0
      #0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2
      #1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9
      #2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9
      #3 0x55c93a1528db in metricgroup__add_metric
  tools/perf/util/metricgroup.c:943:9
      #4 0x55c93a151996 in metricgroup__add_metric_list
  tools/perf/util/metricgroup.c:988:9
      #5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8
      #6 0x55c93a1513e1 in metricgroup__parse_groups_test
  tools/perf/util/metricgroup.c:1082:9
      #7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8
      #8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9
      #9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2
      #10 0x55c93a00f1e8 in test__parse_metric
  tools/perf/tests/parse-metric.c:345:2
      #11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9
      #12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9
      #13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4
      #14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9
      #15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11
      #16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8
      #17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2
      #18 0x55c939e45f7e in main tools/perf/perf.c:539:3

  0x55c93b4d59e8 is located 0 bytes to the right of global variable
  'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25'
  (0x55c93b4d54a0) of size 1352
  SUMMARY: AddressSanitizer: global-buffer-overflow
  tools/perf/util/metricgroup.c:764:2 in find_metric
  Shadow bytes around the buggy address:
    0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  =>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9
    0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
    0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00
    0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
  Shadow byte legend (one shadow byte represents 8 application bytes):
    Addressable:           00
    Partially addressable: 01 02 03 04 05 06 07
    Heap left redzone:	   fa
    Freed heap region:	   fd
    Stack left redzone:	   f1
    Stack mid redzone:	   f2
    Stack right redzone:     f3
    Stack after return:	   f5
    Stack use after scope:   f8
    Global redzone:          f9
    Global init order:	   f6
    Poisoned by user:        f7
    Container overflow:	   fc
    Array cookie:            ac
    Intra object redzone:    bb
    ASan internal:           fe
    Left alloca redzone:     ca
    Right alloca redzone:    cb
    Shadow gap:              cc
</quote>

I'm also adding the missing "Fixes" tag and setting just .name to NULL,
as doing it that way is more compact (the compiler will zero out
everything else) and the table iterators look for .name being NULL as
the sentinel marking the end of the table.

Fixes: 0a507af9 ("perf tests: Add parse metric test for ipc metric")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200825071211.16959-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently if we run 'perf record -e cycles:u', exclude_guest=0.

But it doesn't make sense in most cases that we request for
user-space counting but we also get the guest report.

Of course, we also need to consider 'perf kvm' usage case that
authorized perf users on the host may only want to count guest user
space events. For example,

  # perf kvm --guest record -e cycles:u

When we have 'exclude_guest=1' for 'perf kvm' usage, we may get nothing
from guest events.

To keep perf semantics consistent and clear, this patch sets
exclude_guest=1 for user-space counting but except for 'perf kvm' usage.

Before:

  perf record -e cycles:u ./div
  perf evlist -v
  cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, ...

After:
  perf record -e cycles:u ./div
  perf evlist -v
  cycles:u: ..., exclude_kernel: 1, exclude_hv: 1,  exclude_guest: 1, ...

Before:
  perf kvm --guest record -e cycles:u -vvv

perf_event_attr:

  size                             120
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|ID|CPU|PERIOD
  read_format                      ID
  disabled                         1
  inherit                          1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1

After:

  perf kvm --guest record -e cycles:u -vvv

perf_event_attr:
  size                             120
  { sample_period, sample_freq }   4000
  sample_type                      IP|TID|TIME|ID|CPU|PERIOD
  read_format                      ID
  disabled                         1
  inherit                          1
  exclude_kernel                   1
  exclude_hv                       1
  freq                             1
  sample_id_all                    1

For Before/After, exclude_guest are both 0 for perf kvm usage.

perf test 6

 6: Parse event definition strings             : Ok
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Like Xu <like.xu@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200814012120.16647-1-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The help info of option "--no-bpf-event" is wrongly described as "record
bpf events", correct it.

Committer testing:

  $ perf record -h bpf

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

          --clang-opt <clang options>
                            options passed to clang when compiling BPF scriptlets
          --clang-path <clang path>
                            clang binary to use for compiling BPF scriptlets
          --no-bpf-event    do not record bpf events

  $

Fixes: 71184c6a ("perf record: Replace option --bpf-event with --no-bpf-event")
Signed-off-by: Wei Li <liwei391@huawei.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A couple of trivial fixes for using %zd for size_t in the code
supporting the ZSTD compression library.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200820212501.24421-1-chris@chris-wilson.co.ukSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.

This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".

Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses

Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>

It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.

Detect the corner case and correctly compute the size.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>

When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull documentation fixes from Jonathan Corbet:
 "A handful of documentation fixes for 5.9"

* tag 'docs-5.9-3' of git://git.lwn.net/linux:
  Documentation: laptops: thinkpad-acpi: fix underline length build warning
  Documentation: fix typo for abituguru documentation
  docs: Fix function name trailing double-()s
  devices.txt: fix typo of "ubd" as "udb"
  Documentation: add riscv entry in list of existing profiles
  MAINTAINERS: mention documentation maintainer entry profile
  Fpga: Documentation: Replace deprecated :c:func: Usage
  IIO: Documentation: Replace deprecated :c:func: Usage
  Documentation/locking/locktypes: fix local_locks documentation

Pull MMC fixes from Ulf Hansson:

 - Fix HS400 tuning for ACPI ID AMDI0040

 - Fix reset of CQHCI for Intel GLK-based controllers

 - Use correct timeout clock for Tegra186/194/210

 - Fix eMMC mounting on mt7622/Bpi-64

* tag 'mmc-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  sdhci: tegra: Add missing TMCLK for data timeout
  arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes
  arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes
  arm64: tegra: Add missing timeout clock to Tegra210 SDMMC
  dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later
  sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186
  sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210
  arm64: dts: mt7622: add reset node for mmc device
  dt-bindings: mmc: Add missing description for clk_in/out_sd1
  mmc: mediatek: add optional module reset property
  mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings
  mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers
  mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040

Fix min_low_pfn/max_low_pfn build errors for arch/microblaze/: (e.g.)

  ERROR: "min_low_pfn" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!
  ERROR: "min_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu_sink.ko] undefined!
  ERROR: "min_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
  ERROR: "min_low_pfn" [drivers/mmc/core/mmc_core.ko] undefined!
  ERROR: "min_low_pfn" [drivers/md/dm-crypt.ko] undefined!
  ERROR: "min_low_pfn" [drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko] undefined!
  ERROR: "min_low_pfn" [crypto/tcrypt.ko] undefined!
  ERROR: "min_low_pfn" [crypto/asymmetric_keys/asym_tpm.ko] undefined!

Mike had/has an alternate patch for Microblaze:
https://lore.kernel.org/lkml/20200630111519.GA1951986@linux.ibm.com/

David suggested just exporting min_low_pfn & max_low_pfn in
mm/memblock.c:
https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2006291911220.1118534@chino.kir.corp.google.com/Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Michal Simek <monstr@monstr.eu>
Acked-by: David Rientjes <rientjes@google.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>

The basic permission bits (protection bits in AmigaOS) have been broken
in Linux' AFFS - it would only set bits, but never delete them.
Also, contrary to the documentation, the Archived bit was not handled.

Let's fix this for good, and set the bits such that Linux and classic
AmigaOS can coexist in the most peaceful manner.

Also, update the documentation to represent the current state of things.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: David Sterba <dsterba@suse.com>

When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.

Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.

One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>