Merge tag 'qcom-pinctrl-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel

Qualcomm pinctrl Devicetree bindings changes for v6.3, part two

Several minor cleanups and fixes on Qualcomm pin controller Devicetree
bindings - add missing input-disable, correct GPIO pin name patterns in
bindings, correct number of GPIOs in gpio-ranges property.

Add pinctrl driver for the MediaTek MT7981 SoC, based on the driver
which can also be found the SDK.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ef5112946d16cacc67e65e439ba7b52a9950c1bb.1674693008.git.daniel@makrotopia.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add bindings for the MT7981 pinctrl driver. As MT7981 has most features
in common with MT7986 (but has a different layout in terms on pinctrl
and clocks), the existing mediatek,mt7986-pinctrl.yaml was used as an
example to create a similar document covering MT7981.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/3f0fd0becc338eef66caeb7244c3c432b8d1ef7a.1674693008.git.daniel@makrotopia.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Mark gpio sub nodes of pinctrl as deprecated.
Gpio nodes are now placed in the root of the device tree.
The relation to pinctrl is now described with the
"gpio-ranges" property.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/137b56f0-8e86-f705-4ba7-d5dfe3c0b477@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm
platforms, so add a driver for it.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206071217.29313-3-quic_kathirav@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree bindings for IPQ5332 TLMM block.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206071217.29313-2-quic_kathirav@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Narrow the pattern of possible GPIO names for pin controllers:
 - SC7280 LPASS: GPIOs 0-14
 - SM8250 LPASS: GPIOs 0-13
 - SM8450 LPASS: GPIOs 0-22
 - SC8280XP LPASS: GPIOs 0-18
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230203164854.390080-1-krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230203164854.390080-2-krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230203164854.390080-3-krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230203164854.390080-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Add druver for pin controller in Low Power Audio SubSystem (LPASS).  The
driver is similar to SM8450 LPASS pin controller, with differences in
few pin groups (qua_mi2s -> i2s0).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230203174645.597053-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add bidings for pin controller in Low Power Audio SubSystem (LPASS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230203174645.597053-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Correct the number of GPIOs in gpio-ranges to match reality.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-8-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The MSM8994 TLMM pin controller has GPIOs 0-145, so narrow the pattern
and reduce sizes of arrays with pins.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-7-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The SDX55 TLMM pin controller has GPIOs 0-107, so narrow the pattern.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-6-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The MSM8953 TLMM pin controller has GPIOs 0-141, so narrow the pattern.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230202104452.299048-5-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The SM6375 TLMM pin controller has GPIOs 0-155, so narrow the pattern
and gpio-ranges in the example.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The MSM8909 TLMM pin controller has GPIOs 0-112, so narrow the pattern
and gpio-ranges in the example.

Fixes: c249ec7b ("dt-bindings: pinctrl: Add DT schema for qcom,msm8909-tlmm")
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230202104452.299048-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The MSM8226 TLMM pin controller has GPIOs 0-116, so correct the pattern
to bring back missing 107-109.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230202104452.299048-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

The SM8350 HDK8350 board uses input-disable property, so allow it:

  sm8350-hdk.dtb: pinctrl@f100000: lt9611-state: 'oneOf' conditional failed, one must be fixed:
    ...
    'input-disable' does not match any of the regexes: 'pinctrl-[0-9]+'
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230201154321.276419-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Add support for Lemans TLMM configuration and control via the pinctrl
framework.
Signed-off-by: Yadu MG <quic_ymg@quicinc.com>
Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
[Bartosz: made the driver ready for upstream]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-3-brgl@bgdev.plSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add DT bindings for the TLMM controller on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-2-brgl@bgdev.plSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v6.3-1

* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups

The following is an automated git shortlog grouped by driver:

pinctrl:
 - Proofreading and updating the documentation accordingly
 - Proofreading and updating the documentation (part 2)

alderlake:
 -  Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

baytrail:
 -  Convert to use new memeber in struct intel_function

broxton:
 -  Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()

cannonlake:
 -  Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

cedarfork:
 -  Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

cherryview:
 -  Convert to use new memeber in struct intel_function

denverton:
 -  Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()

elkhartlake:
 -  Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

emmitsburg:
 -  Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()

geminilake:
 -  Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()

icelake:
 -  Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

intel:
 -  Get rid of unused members in struct intel_function
 -  Make use of struct pinfunction and PINCTRL_PINFUNCTION()
 -  Define maximum pad number in the group
 -  Use same order of bit fields for PADCFG2
 -  Add ~4k bias support
 -  Add definitions to all possible biases
 -  Deduplicate some code in intel_config_set_pull()
 -  Add default case to intel_config_set_pull()
 -  Convert to generic_handle_domain_irq()
 -  Always use gpp_num_padown_regs in the main driver
 -  Introduce INTEL_COMMUNITY_*() to unify community macros

Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
 - Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro

jasperlake:
 -  Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

lakefield:
 -  Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

lewisburg:
 -  Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()

lynxpoint:
 -  Convert to use new memeber in struct intel_function

merrifield:
 -  Convert to use new memeber in struct intel_function

meteorlake:
 -  Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

moorefield:
 -  Convert to use new memeber in struct intel_function

sunrisepoint:
 -  Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()

tigerlake:
 -  Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Merge tag 'renesas-pinctrl-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v6.3

  - Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
  - Miscellaneous fixes and improvements.

Merge tag 'qcom-pinctrl-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel

Qualcomm pinctrl Devicetree bindings changes for v6.3

Set of cleanups and fixes for Qualcomm pin controller bindings, to match
existing DTS and correct the schema.

AT91 pinctrl deferred probing support is broken if the GPIO devices
haven't probed first and set gpio_banks to non-zero. The later condition
that only some GPIO devices haven't probed can't actually happen as
either all the GPIO devices have probed first or none of them have. Plus
the pinctrl driver has already returned -EINVAL, so it's not on the
deferred list to retry probing.

Fix this by consolidating the checking that all GPIO devices are probed.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d3 xplained
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20180712192222.32481-1-robh@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The child node name patterns in Mediatek pinctrl bindings don't match
reality. I don't know where '-[0-9]+$' came from, but I don't see any nodes
with a matching pattern. Also, patterns such as 'pins' or 'mux' are
ambiguous because any prefix or suffix is allowed. If that's desired, it
should be explicit.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120020536.3229300-1-robh@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Tag the suspend/resume callbacks as __maybe_unused to silence
complaints from the build robots.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add pins, groups, and functions for channels 4 and 5 of the Video Input
Module (VIN) on the Renesas R-Car H3 ES1.x (R8A77950) SoC, based on
the version for the R-Car H3 ES2.0+ (R8A77951) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/92c9b3b535d27ea7fcc0aa73d298783d710c214a.1673425207.git.geert+renesas@glider.be

Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each
supported SoC.

While at it, for readability set n_port_pins based on the GPIO pin configs
and not on GPIO names for r9a07g044_data as done for r9a07g043_data.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.

Fixes: bfc69bdb ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The alignment of the second column in the definitions of the GPSR[678]_*
macros does not match the alignment used in other definitions.
Fix this to improve uniformity.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9424a0e7f6d66a94d333df9fdc5cdf3b7defb8f5.1669036423.git.geert+renesas@glider.be

Add devicetree bindings for Mediatek MT8365 pinctrl driver.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-5-bero@baylibre.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.

Fixes: 184d8e13 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.

Fixes: 184d8e13 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The device fwnode can be get via dev_fwnode() getter.
Use it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230113220703.45686-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This reverts commit 3550bba2.

No users for this one, revert it for good.
The ->add_pin_ranges() can be used instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-5-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.

The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.

Fixes: d2b67744 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The ->add_pin_ranges() is supposed to be called for the backward
compatiblity on Device Tree platforms or non-DT ones. Ensure that
by checking presense of the "gpio-ranges" property.

This allows to clean up a few existing drivers to avoid duplication
of the check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-2-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Just 'mpp' is a bit ambiguous for a pattern as it allows any prefix or
suffix. Change the node name pattern to "-pins$" to align with other
Qualcomm pinctrl bindings.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120165103.1278852-1-robh@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Do the following:
- update the "Definitions" style in two sections
- don't use "I" for technical documentation
- inline the remaining (variables, function names, file paths)
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>