Document V4L2_CID_HDR_MODE possible values for this sensor.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Add device tree binding for the ST VGXY61 camera sensor, and update
MAINTAINERS file.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the
sensor, and its documentation.
Menu items are not standardized as they differ for each sensors.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

This extends the greyscale media bus family originally from
MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding
MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits.
Add its documentation in subdev-formats.rst
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This
is a 4 Mpx image sensor using the I2C bus for control and the CSI-2
bus for data.

This driver supports following features:
- manual exposure and analog gain control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
  + 2688x1520 at 30 fps

The driver provides all mandatory V4L2 controls for compatibility with
libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver
implements 4 lane mode only at this moment.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Add device-tree binding documentation for OV4689 image sensor driver,
and the relevant MAINTAINERS entries.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.

This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- support following resolutions:
  + 3856x2464 at 30FPS
  + 1928x1208 at 30FPS
Signed-off-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Commit 1f391df4 ("media: v4l2-async: Use endpoints in
__v4l2_async_nf_add_fwnode_remote()") changed the data that is stored in
the v4l2_async_subdev internals from the fwnode pointer to the parent
device to the fwnode pointer to the matched endpoint. This broke the
sensor matching code, which relied on the particular fwnode data in the
v4l2_async_subdev internals. Fix this by simply matching the
v4l2_async_subdev pointer, which is already available there.
Reported-by: Daniel Scally <djrscally@gmail.com>
Fixes: fa91f105 ("[media] exynos4-is: Add support for asynchronous subdevices registration")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

The V4L2 fwnode data structure doesn't get freed on unbind, which leads to
a memleak.

Fixes: e43ccb0a ("media: i2c: Add support for the OV5648 image sensor")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

There were no runtime PM callbacks registered, leaving regulators being
enabled while the device is suspended on DT systems. Adjust and register
existing power controlling functions to turn them off/on.
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Error path seems to be swaped. Fix the order and provide some meaningful
names.

Fixes: bee3d511 ("[media] ad5820: Add driver for auto-focus coil")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

The OV5645 sensor has a single clock source, so just drop fetching the
clk reference by name.

This is in preparation to drop the "clock-names" property from the DT
binding.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

If any of the checks related to the supported link frequencies fail, then
the V4L2 fwnode resources don't get released before returning, which leads
to a memleak. Fix this by properly freeing the V4L2 fwnode data in a
designated label.

Fixes: e8c08826 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Runtime PM has been around for a decade or more, there's hardly a need to
use the V4L2 specific s_power() callback in drivers anymore. Document this
in s_power() callback documentation as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.

The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().

Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection().

Fixes: 0d346d2a ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Pull kvm fixes from Paolo Bonzini:
 "RISC-V:

   - Fix compilation without RISCV_ISA_ZICBOM

   - Fix kvm_riscv_vcpu_timer_pending() for Sstc

  ARM:

   - Fix a bug preventing restoring an ITS containing mappings for very
     large and very sparse device topology

   - Work around a relocation handling error when compiling the nVHE
     object with profile optimisation

   - Fix for stage-2 invalidation holding the VM MMU lock for too long
     by limiting the walk to the largest block mapping size

   - Enable stack protection and branch profiling for VHE

   - Two selftest fixes

  x86:

   - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl

  selftests:

   - synchronize includes between include/uapi and tools/include/uapi"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  tools: include: sync include/api/linux/kvm.h
  KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
  KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
  kvm: Add support for arch compat vm ioctls
  RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
  RISC-V: Fix compilation without RISCV_ISA_ZICBOM
  KVM: arm64: vgic: Fix exit condition in scan_its_table()
  KVM: arm64: nvhe: Fix build with profile optimization
  KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
  KVM: arm64: selftests: Fix multiple versions of GIC creation
  KVM: arm64: Enable stack protection and branch profiling for VHE
  KVM: arm64: Limit stage2_apply_range() batch size to largest block
  KVM: arm64: Work out supported block level at compile time

This reverts commit 72a95859.

It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver.  Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.

Fixes: 72a95859 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch") added
a new entry to the uts_kern_table[] array, but didn't update the
UTS_PROC_xyz enumerators of older entries, breaking anything that used
them.

Which is admittedly not many cases: it's really just the two uses of
uts_proc_notify() in kernel/sys.c.  But apparently journald-systemd
actually uses this to detect hostname changes.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Fixes: bfca3dd3 ("kernel/utsname_sysctl.c: print kernel arch")
Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/
Cc: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Borislav Petkov:

 - Fix raw data handling when perf events are used in bpf

 - Rework how SIGTRAPs get delivered to events to address a bunch of
   problems with it. Add a selftest for that too

* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bpf: Fix sample_flags for bpf_perf_event_output
  selftests/perf_events: Add a SIGTRAP stress test with disables
  perf: Fix missing SIGTRAPs

Pull scheduler fixes from Borislav Petkov:

 - Adjust code to not trip up CFI

 - Fix sched group cookie matching

* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Introduce struct balance_callback to avoid CFI mismatches
  sched/core: Fix comparison in sched_group_cookie_match()

Pull objtool fix from Borislav Petkov:

 - Fix ORC stack unwinding when GCOV is enabled

* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix unreliable stack dump with gcov

Pull x86 fixes from Borislav Petkov:
 "As usually the case, right after a major release, the tip urgent
  branches accumulate a couple more fixes than normal. And here is the
  x86, a bit bigger, urgent pile.

   - Use the correct CPU capability clearing function on the error path
     in Intel perf LBR

   - A CFI fix to ftrace along with a simplification

   - Adjust handling of zero capacity bit mask for resctrl cache
     allocation on AMD

   - A fix to the AMD microcode loader to attempt patch application on
     every logical thread

   - A couple of topology fixes to handle CPUID leaf 0x1f enumeration
     info properly

   - Drop a -mabi=ms compiler option check as both compilers support it
     now anyway

   - A couple of fixes to how the initial, statically allocated FPU
     buffer state is setup and its interaction with dynamic states at
     runtime"

* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
  perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
  ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
  x86/ftrace: Remove ftrace_epilogue()
  x86/resctrl: Fix min_cbm_bits for AMD
  x86/microcode/AMD: Apply the patch early on every logical thread
  x86/topology: Fix duplicated core ID within a package
  x86/topology: Fix multiple packages shown on a single-package system
  hwmon/coretemp: Handle large core ID value
  x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
  x86/fpu: Exclude dynamic states from init_fpstate
  x86/fpu: Fix the init_fpstate size check with the actual size
  x86/fpu: Configure init_fpstate attributes orderly

Pull io_uring follow-up from Jens Axboe:
 "Currently the zero-copy has automatic fallback to normal transmit, and
  it was decided that it'd be cleaner to return an error instead if the
  socket type doesn't support it.

  Zero-copy does work with UDP and TCP, it's more of a future proofing
  kind of thing (eg for samba)"

* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
  io_uring/net: fail zc sendmsg when unsupported by socket
  io_uring/net: fail zc send when unsupported by socket
  net: flag sockets supporting msghdr originated zerocopy

Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - corsair-psu: Fix typo in USB id description, and add USB ID for new
   PSU

 - pwm-fan: Fix fan power handling when disabling fan control

* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (corsair-psu) Add USB id of the new HX1500i psu
  hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
  hwmon: (corsair-psu) fix typo in USB id description

Pull i2c fixes from Wolfram Sang:
 "RPM fix for qcom-cci, platform module alias for xiic, build warning
  fix for mlxbf, typo fixes in comments"

* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxbf: depend on ACPI; clean away ifdeffage
  i2c: fix spelling typos in comments
  i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
  i2c: xiic: Add platform module alias

Pull pci fixes from Bjorn Helgaas:

 - Revert a simplification that broke pci-tegra due to a masking error

 - Update MAINTAINERS for Kishon's email address change and TI
   DRA7XX/J721E maintainer change

* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
  MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
  Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"

Pull missed media updates from Mauro Carvalho Chehab:
 "It seems I screwed-up my previous pull request: it ends up that only
  half of the media patches that were in linux-next got merged in -rc1.

  The script which creates the signed tags silently failed due to
  5.19->6.0 so it ended generating a tag with incomplete stuff.

  So here are the missing parts:

   - a DVB core security fix

   - lots of fixes and cleanups for atomisp staging driver

   - old drivers that are VB1 are being moved to staging to be
     deprecated

   - several driver updates - mostly for embedded systems, but there are
     also some things addressing issues with some PC webcams, in the UVC
     video driver"

* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
  media: sun6i-csi: Move csi buffer definition to main header file
  media: sun6i-csi: Introduce and use video helper functions
  media: sun6i-csi: Add media ops with link notify callback
  media: sun6i-csi: Remove controls handler from the driver
  media: sun6i-csi: Register the media device after creation
  media: sun6i-csi: Pass and store csi device directly in video code
  media: sun6i-csi: Tidy up video code
  media: sun6i-csi: Tidy up v4l2 code
  media: sun6i-csi: Tidy up Kconfig
  media: sun6i-csi: Use runtime pm for clocks and reset
  media: sun6i-csi: Define and use variant to get module clock rate
  media: sun6i-csi: Always set exclusive module clock rate
  media: sun6i-csi: Tidy up platform code
  media: sun6i-csi: Refactor main driver data structures
  media: sun6i-csi: Define and use driver name and (reworked) description
  media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
  ...

The previous patch fails zerocopy send requests for protocols that don't
support it, do the same for zerocopy sendmsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

If a protocol doesn't support zerocopy it will silently fall back to
copying. This type of behaviour has always been a source of troubles
so it's better to fail such requests instead.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

We need an efficient way in io_uring to check whether a socket supports
zerocopy with msghdr provided ubuf_info. Add a new flag into the struct
socket flags fields.

Cc: <stable@vger.kernel.org> # 6.0
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Also update the documentation accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomainSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL.

Fixes: 17601bfe ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in
struct which means it has a different struct size depending on whether
it gets called from 32bit or 64bit code.

This patch introduces compat code that converts from the 32bit struct to
its 64bit counterpart which then gets used going forward internally.
With this applied, 32bit QEMU can successfully set MSR bitmaps when
running on 64bit kernels.
Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Fixes: 1a155254 ("KVM: x86: Introduce MSR filtering")
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-4-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In the next patch we want to introduce a second caller to
set_msr_filter() which constructs its own filter list on the stack.
Refactor the original function so it takes it as argument instead of
reading it through copy_from_user().
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-3-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

We will introduce the first architecture specific compat vm ioctl in the
next patch. Add all necessary boilerplate to allow architectures to
override compat vm ioctls when necessary.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20221017184541.2658-2-graf@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM/riscv fixes for 6.1, take #1

- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc

Merge tag 'kvmarm-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #2

- Fix a bug preventing restoring an ITS containing mappings
  for very large and very sparse device topology

- Work around a relocation handling error when compiling
  the nVHE object with profile optimisation

Merge tag 'kvmarm-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.1, take #1

- Fix for stage-2 invalidation holding the VM MMU lock
  for too long by limiting the walk to the largest
  block mapping size

- Enable stack protection and branch profiling for VHE

- Two selftest fixes