- 05 Dec, 2023 26 commits
-
-
Dmitry Baryshkov authored
There are just two places where we set the bandwidth: in the resume and in the suspend paths. Drop the wrapping function msm_mdss_icc_request_bw() and call icc_set_bw() directly. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/570168/ Link: https://lore.kernel.org/r/20231202224247.1282567-4-dmitry.baryshkov@linaro.org
-
Konrad Dybcio authored
The DPU1 driver needs to handle all MDPn<->DDR paths, as well as CPU<->SLAVE_DISPLAY_CFG. The former ones share how their values are calculated, but the latter one has static predefines spanning all SoCs. In preparation for supporting the CPU<->SLAVE_DISPLAY_CFG path, rename the path-related struct members to include "mdp_". Signed-off-by:
-
Dmitry Baryshkov authored
Stop using hand-written reset function for ICC release, use devm_of_icc_get() instead. Signed-off-by:
-
Neil Armstrong authored
Add DSI Controller version 2.8.0 support for the SM8650 platform. Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/564977/ Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-mdss-v2-8-43f1887c82b8@linaro.orgSigned-off-by:
-
Neil Armstrong authored
Add DSI PHY support for the SM8650 platform. Reviewed-by:
-
Neil Armstrong authored
Add Mobile Display Subsystem (MDSS) support for the SM8650 platform. Reviewed-by:
-
Neil Armstrong authored
Add DPU version 10.0 support for the SM8650 platform. Signed-off-by:
-
Neil Armstrong authored
Document the Mobile Display Subsystem (MDSS) on the SM8650 Platform. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Neil Armstrong authored
Document the DPU Display Controller on the SM8650 Platform. Reviewed-by:
-
Neil Armstrong authored
Document the DSI Controller on the SM8650 Platform. Reviewed-by:
-
Neil Armstrong authored
Document the DSI PHY on the SM8650 Platform. Reviewed-by:
-
Richard Acayan authored
The Snapdragon 670 uses similar clocks (with one frequency added) to the Snapdragon 845 but reports DPU revision 4.1. Add support for this DPU with configuration from the Pixel 3a downstream kernel. Since revision 4.0 is SDM845, reuse some configuration from its catalog entry. Link: https://android.googlesource.com/kernel/msm/+/368478b0ae76566927a2769a2bf24dfe7f38bb78/arch/arm64/boot/dts/qcom/sdm670-sde.dtsiSigned-off-by:
Richard Acayan <mailingradian@gmail.com> Reviewed-by:
-
Richard Acayan authored
Add support for the MDSS block on the SDM670 platform. Reviewed-by:
-
Richard Acayan authored
Add documentation for the SDM670 display subsystem, adapted from the SDM845 and SM6125 documentation. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Richard Acayan authored
The SDM670 display controller has the same requirements as the SDM845 display controller, despite having distinct properties as described in the catalog. Add the compatible for SDM670 to the SDM845 controller. Acked-by:
-
Richard Acayan authored
The SDM670 has DSI ports. Add the compatible for the controller. Acked-by:
-
Dmitry Baryshkov authored
After folding QSEED3LITE and QSEED4 feature bits into QSEED3_COMPATIBLE several VIG feature masks became equal. Drop these duplicates. Signed-off-by:
-
Dmitry Baryshkov authored
Three different features, DPU_SSPP_SCALER_QSEED3, QSEED3LITE and QSEED4 are all related to different versions of the same HW scaling block. Corresponding driver parts use scaler_blk.version to identify the correct way to program the hardware. In order to simplify the driver codepath, merge these three feature bits into QSEED3_COMPATIBLE bin. Signed-off-by:
-
Dmitry Baryshkov authored
In order to check whether the SSPP block has scaler and CSC subblocks the funcion dpu_plane_atomic_check_pipe() uses macros which enumerate all possible scaler and CSC features. Replace those checks with the scaler and CSC subblock length checks in order to be able to drop those two macros. Suggested-by:
-
Dmitry Baryshkov authored
As the subblock info is now mostly gone, inline and drop the macro DPU_HW_SUBBLK_INFO. Reviewed-by:
-
Dmitry Baryshkov authored
As we have dropped the variadic parts of SSPP sub-blocks declarations, deduplicate them now, reducing memory cruft. Reviewed-by:
-
Dmitry Baryshkov authored
In preparation to deduplicating SSPP subblocks, drop the (unused) `smart_dma_priority' field from struct dpu_sspp_sub_blks. If it is needed later (e.g. for SmartDMA v1), it should be added to the SSPP declarations themselves. Reviewed-by:
-
Dmitry Baryshkov authored
The field `id' is not used for subblocks. The handling code usually knows, which sub-block it is now looking at. Drop the field completely. Reviewed-by:
-
Marijn Suijten authored
The SSPP scaler subblk is responsible for reporting its version (via the .id field, feature bits on the parent SSPP block, and since recently also from reading a register to supersede a read-but-unset version field in the catalog), leaving this global qseed_type field logically unused. Remove this dead code to lighten the catalog and bringup-overhead. Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
Marijn Suijten authored
This pointer callback is never used and should be removed. Signed-off-by:
-
Dmitry Baryshkov authored
The function _dpu_hw_sspp_setup_scaler3() passes and dpu_hw_setup_scaler3() uses scaler_blk.version to determine in which way the scaler (QSEED3) block should be programmed. However up to now we were not setting this field. Set it now, splitting the vig_sblk data which has different version fields. Reported-by:
-
- 04 Dec, 2023 1 commit
-
-
Harshit Mogalapalli authored
When pm_runtime_resume_and_get() fails, unlock before returning. Fixes: 5814b8bf ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by:
-
- 03 Dec, 2023 13 commits
-
-
Konrad Dybcio authored
Some devices power the DSI PHY/PLL through a power rail that we model as a GENPD. Enable runtime PM to make it suspendable. Signed-off-by:
-
Konrad Dybcio authored
This helper has been introduced to avoid programmer errors (missing _put calls leading to dangling refcnt) when using pm_runtime_get, use it. While at it, start checking the return value. Signed-off-by:
-
Bjorn Andersson authored
Similar to SC8280XP, the misconfigured SAFE logic causes rather significant delays in __arm_smmu_tlb_sync(), resulting in poor performance for things such as USB. Introduce appropriate SAFE values for SC8180X to correct this. Fixes: f3af2d6e ("drm/msm/dpu: Add SC8180x to hw catalog") Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Reported-by:
Anton Bambura <jenneron@postmarketos.org> Reviewed-by:
-
Paloma Arellano authored
Trigger a devcoredump to dump dpu registers and capture the drm atomic state when the frame_done_timer timeouts. v2: Optimize the format in which frame_done_timeout_cnt is incremented v3: Describe parameter frame_done_timeout_cnt in dpu_encoder_virt Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312010225.2OJWLKmA-lkp@intel.com/Reviewed-by:
Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by:
-
Rob Clark authored
The UBWC settings need to match between the display and GPU. When we updated the GPU settings, we forgot to make the corresponding update on the display side. Reported-by:
Steev Klimaszewski <steev@kali.org> Fixes: 07e6de73 ("drm/msm/a690: Fix reg values for a690") Signed-off-by:
Rob Clark <robdclark@chromium.org> Tested-by:
-
Kuogee Hsieh authored
Currently eDP population is done at msm_dp_modeset_init() which happen at binding time. Move eDP population to be done at display probe time so that probe deferral cases can be handled effectively. wait_for_hpd_asserted callback is added during drm_dp_aux_init() to ensure eDP's HPD is up before proceeding eDP population. Changes in v5: -- inline dp_display_auxbus_population() and delete it Changes in v4: -- delete duplicate initialize code to dp_aux before drm_dp_aux_register() -- delete of_get_child_by_name(dev->of_node, "aux-bus") and inline the function -- not initialize rc = 0 Changes in v3: -- add done_probing callback into devm_of_dp_aux_populate_bus() Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Kuogee Hsieh authored
EV_HPD_INIT_SETUP flag is used to trigger the initialization of external DP host controller. Since external DP host controller initialization had been incorporated into pm_runtime_resume(), this flag became obsolete. msm_dp_irq_postinstall() which triggers EV_HPD_INIT_SETUP event is obsoleted accordingly. Changes in v4: -- reworded commit text -- drop EV_HPD_INIT_SETUP -- drop msm_dp_irq_postinstall() Changes in v3: -- drop EV_HPD_INIT_SETUP and msm_dp_irq_postinstall() Signed-off-by:
-
Kuogee Hsieh authored
Currently DP driver is executed independent of PM runtime framework. This leads msm eDP panel can not being detected by edp_panel driver during generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver. Incorporate PM runtime framework into DP driver so that host controller's power and clocks are enable/disable through PM runtime mechanism. Once PM runtime framework is incorporated into DP driver, waking up device from power up path is not necessary. Hence remove it. After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend() to handle power off both DP phy and controller during suspend and dp_pm_resume() to handle power on both DP phy and controller during resume are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume() respectively. Changes in v9: -- silent compiler warning message at dp_power_init() and dp_power_deinit() with W1 flag Changes in v7: -- add comments to dp_pm_runtime_resume() -- add comments to dp_bridge_hpd_enable() -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() Changes in v6: -- delete dp_power_client_deinit(dp->power); -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() -- add IRQF_NO_AUTOEN to devm_request_irq() -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() Changes in v5: -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() -- squash add pm_runtime_force_suspend()/resume() patch into this patch Changes in v4: -- reworded commit text to explain why pm_framework is required for edp panel -- reworded commit text to explain autosuspend is choiced -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 -- return value from pm_runtime_resume_and_get() directly -- check return value of devm_pm_runtime_enable() -- delete pm_runtime_xxx from dp_display_remove() -- drop dp_display_host_init() from EV_HPD_INIT_SETUP -- drop both dp_pm_prepare() and dp_pm_compete() from this change -- delete ST_SUSPENDED state -- rewording commit text to add more details regrading the purpose of this change Changes in v3: -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch -- use pm_runtime_resume_and_get() instead of pm_runtime_get() -- error checking pm_runtime_resume_and_get() return value -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case -- replace dp_pm_suspend() with pm_runtime_force_suspend() -- replace dp_pm_resume() with pm_runtime_force_resume() Signed-off-by:
-
Kuogee Hsieh authored
Original both parser->parse() and dp_power_client_init() are done at dp_display_bind() since eDP population is done at binding time. In the preparation of having eDP population done at probe() time, move both function from dp_display_bind() to dp_display_probe(). Changes in v6: -- move dp_power_client_deinit() to remove() Changes in v5: -- explain why parser->parse() and dp_power_client_init() are moved to probe time -- tear down sub modules if failed Changes in v4: -- split this patch out of "incorporate pm_runtime framework into DP driver" patch Signed-off-by:
-
Kuogee Hsieh authored
Currently DP driver use drm_helper_hpd_irq_event(), bypassing drm bridge framework, to report HPD status changes to user space frame work. Replace it with drm_bridge_hpd_notify() since DP driver is part of drm bridge. Signed-off-by:
-
Kuogee Hsieh authored
The is_connected flag is set to true after DP mainlink successfully finishes link training to enter into ST_MAINLINK_READY state rather than being set after the DP dongle is connected. Rename the is_connected flag with link_ready flag to match the state of DP driver's state machine. Changes in v5: -- reworded commit text according to review comments from change #4 Changes in v4: -- reworded commit text Signed-off-by:
-
Kuogee Hsieh authored
Currently the dp_display_request_irq() is executed at msm_dp_modeset_init() which ties irq registering to the DPU device's life cycle, while depending on resources that are released as the DP device is torn down. Move register DP driver irq handler to dp_display_probe() to have dp_display_irq_handler() IRQ tied with DP device. In addition, use platform_get_irq() to retrieve irq number from platform device directly. Changes in v5: -- reworded commit text as review comments at change #4 -- tear down component if failed at dp_display_request_irq() Changes in v4: -- delete dp->irq check at dp_display_request_irq() Changes in v3: -- move calling dp_display_irq_handler() to probe Signed-off-by:
-
Konrad Dybcio authored
Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there are other connection paths: - a path that connects rotator block to the DDR. - a path that needs to be handled to ensure MDSS register access functions properly, namely the "reg bus", a.k.a the CPU-MDSS CFG interconnect. Describe these paths to allow using them in device trees and in the driver. [Konrad: rework for one vs two MDP paths, update examples] Reviewed-by:
-
