Enable the GPU and provide a path for the ZAP blob.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-4-2a437588e563@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the required nodes to support the A740 GPU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-3-2a437588e563@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the required nodes to support the A730 GPU.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231127-topic-a7xx_dt-v2-2-2a437588e563@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L866-872

Cc: stable@vger.kernel.org # 6.5
Fixes: 61550c6c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-2-3e49c8838c8d@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.

In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.

Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472

Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb10 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Looks like not all firmware versions used for MSM8939 program the timer
frequency for both broadcast/MMIO timers, causing a WARNING at runtime:

WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:38 cev_delta2ns+0x74/0x90
pc : cev_delta2ns+0x74/0x90
lr : clockevents_config.part.0+0x64/0x8c
Call trace:
 cev_delta2ns+0x74/0x90
 clockevents_config_and_register+0x20/0x34
 arch_timer_mem_of_init+0x374/0x534
 timer_probe+0x88/0x110
 time_init+0x14/0x4c
 start_kernel+0x2c0/0x640

Unfortunately there is no way to fix the firmware on most of these
devices since it's proprietary and signed. As a workaround, specify the
clock-frequency explicitly in the DT to fix the warning.

Fixes: 61550c6c ("arm64: dts: qcom: Add msm8939 SoC")
Reported-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8939-timer-v1-1-a2486c625786@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.

Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add node to support the QUP5 SPI controller inside of IPQ6018.
Some routers use this bus to connect SPI TPM chips.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203154003.532765-1-amadeus@jmu.edu.cnSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add node to support all the QUP UART node controller inside of IPQ6018.
Some routers use these bus to connect Bluetooth chips.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231203153914.532654-1-amadeus@jmu.edu.cnSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the remote processors and tighten up the regulators to enable
Wi-Fi functionality on the RB2.

For reference, the hw/sw identifies as:

qmi chip_id 0x150 chip_family 0x4002 board_id 0xff soc_id 0x40670000
qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
firmware ver  api 5 features wowlan,mgmt-tx-by-reference,non-bmi
crc32 b3d4b790
htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231104-topic-rb2_wifi-v1-1-fd45ae535d2f@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now that the WPSS remoteproc is enabled, enable wifi so we can use it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-11-6aa394d33edf@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the ADSP, CDSP, MPSS and WPSS that are found on the SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-10-6aa394d33edf@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.

Remove the reserved-memory node from sc7280-chrome-common since CDSP is
currently not used there.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-9-6aa394d33edf@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the node for the ADSP found on the SC7280 SoC, using standard
Qualcomm firmware.
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-8-6aa394d33edf@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The wpss-pil driver wants to manage too many resources that cannot be
touched with standard Qualcomm firmware.

Use the compatible from the PAS driver and move the ChromeOS-specific
bits to sc7280-chrome-common.dtsi.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231208-sc7280-remoteprocs-v3-7-6aa394d33edf@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable the UFS phy and controller so that we can access the internal
storage of the phone.

At the same time we need to bump the minimum voltage used for UFS VCC,
otherwise it doesn't initialize properly. The 2.952V is taken from the
vcc-voltage-level property downstream.

See also the following link for more information about the VCCQ/VCCQ2:
https://gerrit-public.fairphone.software/plugins/gitiles/kernel/msm-extra/devicetree/+/1590a3739e7dc29d2597307881553236d492f188/fp5/yupik-idp-pm7250b.dtsi#207Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231002-fp5-ufs-v2-1-e2d7de522134@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The dtbs_check really doesn't like having memory without reg set.

The base address depends on the amount of RAM you have:

  <= 2.00 GiB RAM: 0x80000000
   = 3.00 GiB RAM: 0x40000000
   = 3.75 GiB RAM: 0x10000000
 (more does not fit into the 32-bit physical address space)

So, let's pick one of the values, 0x10000000 which is used on devices
with 3.75 GiB RAM. Since the bootloader will update it to what's present
on the device it doesn't matter too much.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-msm8953-misc-fixes-v2-1-df86655841d9@z3ntu.xyzSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add UFS host controller and PHY nodes for sc7280 IDP board.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-3-ad6ca7796de7@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add UFS host controller and PHY nodes for sc7280 soc.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[luca: various cleanups and additions as written in the cover letter]
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231205-sc7280-ufs-v6-2-ad6ca7796de7@fairphone.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Declare the displayport controller present on the Qualcomm SM8650 SoC
and connected to the USB3/DP Combo PHY.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231208-topic-sm8650-upstream-dp-v2-1-69dab3d074e4@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The address/size cells in PWM node are needed only if individual LEDs
are listed.  If multi-led is used, then this leads to dtc W=1 warnings:

  pm8550.dtsi:65.19-73.5: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@c400000/pmic@1/pwm:
    unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231208124332.48636-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add basic support for X1E80100 CRD board dts, which allows it to boot
to a shell.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-5-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add base dtsi and QCP board (Qualcomm Compute Platform) dts file for
X1E80100 SoC, describing the CPUs, GCC and RPMHCC clock controllers,
geni UART, interrupt controller, TLMM, reserved memory, interconnects,
SMMU and LLCC nodes.
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-4-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Document the X1E80100 SoC binding and also the boards using it.
Also document the new board id qcp (Qualcomm Compute Platform).
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-3-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Oryon is the custom ARM CPU core implementation used in Qualcomm's
X1E80100 SoC, document it.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231205062403.14848-2-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch 'icc-x1e80100' of https://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into arm64-for-6.8

Merge the X1E80100 interconnect binding to get access to the
interconnect port constants.

Merge the X1E80100 clock bindings to get access to the clock constants.

Add bindings and update documentation for clock rpmh driver on X1E80100
SoCs.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-4-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add device tree bindings for global clock controller on X1E80100 SoCs.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205061002.30759-2-quic_sibis@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add nodes for WSA8845 speakers on SM8650 MTP board.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-5-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add nodes for LPASS Soundwire v2.0.0 controllers.  Use labels with
indices matching downstream DTS, to make any comparisons easier.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the Low Power Audio SubSystem (LPASS) / ADSP audio codec macros on
Qualcomm SM8650.  The nodes are very similar to SM8550.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the Low Power Audio SubSystem Low Power Island (LPASS LPI) pin
controller device node as part of audio subsystem in Qualcomm SM8650
SoC.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add the ADSP Generic Packet Router (GPR) device node as part of audio
subsystem in Qualcomm SM8650 SoC.

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231204155746.302323-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable IPA on the SM8650 QRD.  The GSI firmware on this platform is
loaded by the AP.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231201-topic-sm8650-upstream-ipa-v1-2-7e8cf7200cd2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add IPA-related nodes and definitions to SM8650 dtsi,
which uses IPA v5.5.1 a minor revision of v5.5 found
in the SM8550 SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231201-topic-sm8650-upstream-ipa-v1-1-7e8cf7200cd2@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now interconnect dependent devices are added in sm8650 DTSI,
now enable more devices for the Qualcomm SM8650 QRD board:
- PCIe
- Display
- DSPs
- SDCard
- UFS
- USB role switch with PMIC Glink
- Bluetooth
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-8-b25fb781da52@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Now interconnect dependent devices are added in sm8650 DTSI,
now enable more devices for the Qualcomm SM8650 MTP board:
- PCIe
- Display
- DSPs
- SDCard
- UFS
- USB role switch with PMIC Glink
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-7-b25fb781da52@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add Hardware nodes that depends on an interconnect property to
be valid.

The includes:
- all QUP i2s/spi nodes
- PCIe
- UFS
- SDHCI
- Display
- HWMON
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-6-b25fb781da52@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add initial QRD (Qualcomm Reference Device) DT, it supports
boot to shell with buttons, leds and USB peripheral.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231130-topic-sm8650-upstream-dt-v5-5-b25fb781da52@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>